-
Two-Component, low-VOC (60 Grams/Ltr.), water-borne epoxy non-slip coating with a fine grit abbrasive. It is perfect for barefoot and recreational traffic areas such as pools, locker rooms, showers, pleasure boats, docks, laundries, walkways and decks. Its high rate of coverage makes it an economical choice. Characteristics: - is self-sealing - enhanced cleanability - chemical resistant - excellent for light industrial and institutional service areas - requires a priming system (PS 100 WB) Available Colors: White Tint Base & Neutral Tint Base -
Two Component, Heavy Duty epoxy with Kevlar is formulated for maximum durability under heavy vehicular traffic. It?s resistant to fire, acid, alkali, solvent, grease, oil, salt water, detergent, alcohol, gasoline, hydraulic fluid, and weather. This makes it ideal for ramps, walkways, forklift traffic, loading docks, ships, stadiums, garages? wherever you need an extremely tough and tenacious anti-slip surface. Originall designed for flight deck operations of naval aircraft carriers where heavy impact resistance is required for repeated landing of aircraft. Characteristics: - high impact resistant - high chemical resistance to acids, alkalis, solvents, grease, oil, salt water, jet fuels, gasoline, detergents, and hydraulic fluids - simple to apply - apply's to metal, concrete, fiberglass, and wood substrates - requires a priming system (PS 100 WB) Available Colors: Gray and Black -
Two Component epoxy anti-slip coating, 100% Solids, Zero VOC, designed for the most demanding environments. AS-2500 provides superior resistance to chemicals and heavy traffic while providing safer footing and traction for rolling equipment. It is odorless and can be used in odor sensitive applications such as wineries, food processing facilities, hospitals and confined areas. Now available in a low temperature cure version for rapid return to service. The LTC hardener can be used at temperatures down to 35?F allowing for application in refrigerated areas or cold environments. Fire retardant in the cured state, AS-2500 resists fire, most acids, alkaline, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, and other hydraulic fluids. Characteristics: - 100% Solids - Zero VOC?s - odorless for sensitive application areas - high chemical resistance - Manufactured with Substainable Raw Materials - Available in Two Versions (Standard Cure & Low Temperature Fast Cure) - Custom colors are available with minimum order requirements - application on concrete, metal, fiberglass, or wood substrate - requires a primer system (PS 100 WR or MS7CZ or MS11CZLT Standard Colors: Gray, Black, and Safety Yellow. -
Two Component epoxy anti-slip coating, 100% Solids, Zero VOC, designed for the most demanding environments. AS-2500 provides superior resistance to chemicals and heavy traffic while providing safer footing and traction for rolling equipment. It is odorless and can be used in odor sensitive applications such as wineries, food processing facilities, hospitals and confined areas. Now available in a low temperature cure version for rapid return to service. The LTC hardener can be used at temperatures down to 35?F allowing for application in refrigerated areas or cold environments. Fire retardant in the cured state, AS-2500 resists fire, most acids, alkaline, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, and other hydraulic fluids. Characteristics: - 100% Solids - Zero VOC?s - odorless for sensitive application areas - high chemical resistance - Manufactured with Substainable Raw Materials - Available in Two Versions (Standard Cure & Low Temperature Fast Cure) - Custom colors are available with minimum order requirements - application on concrete, metal, fiberglass, or wood substrate - requires a primer system (PS 100 WR or MS7CZ or MS11CZLT Standard Colors: Gray, Black, and Safety Yellow.
-
Single Component, Epoxy Ester (HAPS Free) non-slip floor and deck coating designed for heavy pedestrian grade traffic Characteristics: - easy to apply - rapid curing - fire retardant in the cured state - partially used materials can be resealed for up to 24 month shelf life - resists gasoline, oil, acids, alkaline and aliphatic solvents - Colors Available: Gray, Black, Safety Yellow and Two Tint Bases Available Colors: Gray, Black, Safety Yellow, and Two Tint Bases (White & Neutral) -
Single Component, low VOC (32 Grams/Ltr.) elastomeric acrylic anti-slip compound for floor and deck coating application for pedestrian traffic Characteristics: - easy to apply - dries quickly - water based product - can be used right out of the can and resealed for future use - optimum adhesion to to asphalt, concrete, wood, and metal surfaces - Colors Available: Gray & Black and Two Tint Bases: White and Neutral -
● Meets ANSI Z359.11-2014 & ANSI A10.32-12 ● Complaint with OSHA 1926 Subpart M, OSHA 1910 ● Worker Capacity Range: 130-420 lbs. ● Flexible, comfortable and removable support waist belt ● Work Positioning Side D-Rings ● Tongue Buckle Leg Straps ● Identification Label ● Quick adjust torso buckles ● Break-away lanyard keepers -
We carry a series of epoxy compounds for the setting of our injection ports. Call us with your application and we can make a recommendation of the right product for the installation. -
A 20 oz. manual sausage or bulk loading gun w/ smooth and efficient 12:1 ratio drive. Full size handle for applicator comfort and efficient dispensing. Aluminum swivel barrel that exerts 120 psi pressure and 375 lbs. of thrust. Available with bulk loading sleeve for easy loading of cylinder and simple cleanup before dispensing.
-
A 20 oz. (600ml) sausage pack dispensing gun. Heavy duty dent resistant steel barrel swivels for dispensing convenience. Built with a #21-20 Teflon piston for sausage or bulk dispensing. Available with bent plastic cones for applicator comfort. Available with bulk loading sleeve for easy loading of cylinder and simple cleanup before dispensing.
-
Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. These fittings are manufactured from polypropylene plastic and work in a temperature range from -20 Deg. to 150 Deg. F. Used specifically for lay-flat hose with hose clamp connections. Characteristics: - Connections: Male Plug w/ barbed male end for layflat hose applications - Operating temperatures: -20 to 150 Deg. F - Maximum operating pressure is 125 psi - For use with polyurethane, Polyethylene, PVC, and Rubber hose - Meets Federal Specification A-A-59326 - Available with locking or Non-Locking Levers
-
Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. These fittings are manufactured from polypropylene plastic and work in a temperature range from -20 Deg. to 150 Deg. F. F. Characteristics: - Connections: Female socket w/ NPT female end - Operating temperatures: -20 to 150 Deg. F - Maximum operating pressure is 125 psi - For use with Lay-Flat polyurethane, polyethylene, PVC, and rubber hose - Meets Federal Specification A-A-59326 - Available with locking or Non-Locking Levers
-
Epoxy Polyamide, outstanding water resistance in immersion, High Film Build (2 Coats), excellent Chemical Resistance (Splash & Spillage) Low HAP'S Version available (300LH) -
High Build, Coal Tar Epoxy, for protection of steel and concrete in a single or two-coat application, specifically developed for the Corps of Engineers
-
High Build, Thixatropic Mastic, Direct Metal-to-Metal contact, Bureau of Reclamation Spec CA50, for underground tanks, piping, etc.
-
Nulcear grade, penetrating primer/sealer for concrete substrates, DBA tested and certified for use in Nuclear Level 1 areas in a variety of systems with appropiate finish coats
-
Cross-linked epoxy with special reinforcing fillers, severe impact and abrasion resistance, excellent for spalsh zones
-
Glass-flake filled epoxy, extremely tough and abrasion resistant coating, excellent skid resistance
-
Solvent free cross-linked epoxy is used asa a universal primer with excellent adhesion, primer/sealer for concrete, pyrocrete, and masonry surfaces
-
Waterborne epoxy primer, primer/sealer for concrete substrates, promotes adhesion of various topcoats including polyurea/polyurethane elastomers, can be used on dry or damp concrete
-
High Build, Modified Epoxy "Chaulk", good overall chemical resistance and versatility, tank lining applications for transition areas, floors, walls, lap welds, pitted steel, bolts, etc. Ideal for relining or reconditioning older tanks
-
High solids, epoxy surfacer, excellent adhesion to concrete, can be spray applied, squeege, or trowel. Used on concrete or masonry block, provides suitable substrate for application of recommended topcoats in a continous film, free of pinholes and holidays. Not recommended for applciations on wet substrates or at temperautre below 50 Deg. F
-
Modified Phenalkamine, surface toleerant, epoxy specially formulated for Marine or Industrial environments. Suitable for fresh and salt water immersion resistance, good for temperautre down to 0 Deg. F, applicator friendly.
-
Solvent Free Epoxy Patching Compound, concrete and masonry