-
Solvent-free, highly wetting (penetrating), high performance epoxy, used as a pit-filler and blast hold primer for internal tanks linings for chemical or other commodity storage, suited for both new steel and tank relines where severe pitted steel bottoms are common -
Flake-filled, premium epoxy novolac, applied by plural component equipment up to 40 Mils per coat, application temperatures down to 35 Deg. F, extremely tough coating
-
Flake-filled, premium epoxy novolac, similar to the 4550 product, applied by standard spray equipment up to 40 Mils per coat, application temperatures down to 35 Deg. F, extremely tough coating, short but workable potlife
-
Flake-filled, premium epoxy novolac similar in performance to Plasite S, FDA compliant for food grade exposures, applies using standard spray equipment, short pot-life but workable
-
Trowelable epoxy monolithic liner applied at a thickness of 1/8", excellent abrasion resistance, chemical resistance, high compressive strengths, excellent impact resistance. Recommended for concrete tanks, threnched, sumps, stell storage, process tanks in highly corrosive services
-
Trowelable epoxy monolithic liner applied at a thickness of 1/8", excellent abrasion resistance, chemical resistance, high compressive strengths, excellent impact resistance. Recommended for pump casings, conveyor skirts, hoppers, chute lining, pipe elbows, slurry line elbows, cobbler repulp water circulators, feed chutes, pan feeders
-
Solvent free, aggregate-filled, epoxy high-strength monolithic liner, optimum chemical resistance to chemical exposures found in wastewater treatment areas such as manholes and lift stations, trowel applied, single coat to 1/8", cure to water and chemical resistant in 24 hours at 70 Deg. F
-
Cross-linked epoxy phenolic formulated for a wide range of chemical resistance
-
High abrasion resistant version of the Plasite 7122 product
-
Cross linked epoxy-phenolic tank lining for industrial maintenance where release properties are required to reduce or avoid product sticking, hangup, bridging problems in storage tanks, hoppers, or bins
-
Cross linked epoxy-phenolic cured lining, formulated for a wide variety of chemical resistance, applicator friendly, lower VOC than the Plasite 7122 HAR
-
Cross linked epoxy-phenolic formulated with a particular attention to a wide range of chemicals, user friendly, complies with FDA 21 CFR 175.300 criteria for food contact, lower VOC than Plasite 7122
-
Cross linked epoxy-phenolic formulated for a wide chemical resistance, user friendly, provides release properties to reduce or avoid product sticking, hangup, bridging problems, meets FDA requirments for 21 CFR 175.300
-
Polyamide cured epoxy coating, excellent resistance to a wide range of chemicals, solvents and alkalines, Meets GDA requirements for direct food contact, used primarily in the food and beverage industry
-
Polyamide cured epoxy coating primarily used in the food and beverage industry, meets FDA requirements for direct food contact, low VOC, used in the transportation industry (railroad tank cars transporting corn syrups)
-
High solids, amine cured epoxy formulation, excellent resistance to high temperature, high purity water at high pressures, recommended for demieralized water tanks, pressurized process vessels such as oil and water seperators
-
Epoxy primer formulated with special pigmentation to product a cured film having electrical conductivity, a conductive primer for applications to non-conductive substrates prior to topcoating
-
100% solids epoxy filler blended with a properly graded combination of silica fillers and inerts to provide excellent bulking, film strength and working properties for concrete voids, grout, or filling material, meets FDA requirements for 21 CFR, 175.300
-
High-solids, epoxy-novolac with special pigmentation providing excellent corrosion undercut resistance for salt brine services, excellent resistance to high temperature-high water purity, used in the petroleum industry in process water service, excellent coating for under insulation
-
High-solids, epoxy-novolac with special pigmentation providing excellent corrosion undercut resistance for salt brine services, excellent resistance to high temperature-high water puritycan be sprayed at a total film thickness of 18 to 24 Mils in 3 seperate coats, meets FDA requirements,
-
High solid, modified epoxy designed as a highly chemical resistant tank lining, well suited for solvents and fuels -
High abrasion version of the 9060 product
-
High performance tank lining, curing chacteristics allows coating to be applied at temperatures as low as 32 Deg. F while achieving unmatched chemical resistance in caustic, acid, solvent, and ethanol service
-
High solids, modified epoxy coating, excellent resistance to a wide range of chemicals including alkalies. Silicone Carbibe (SC) version has extreme abrasion resistance
