-
Low Viscosity Polyurethane For Fast Repair of Cracks and Spalls in Concrete Characteristics: - Open to traffic in 60 minutes (4,600 psi) - Available in numerous cartridge sizes and in bulk - Self Leveling, Ultra low viscosity penetrates cracks and wets substrate and aggregate - Can be used with concrete powder pigments for color matching - Low odor, 1:1 mix ratio hybrid polyurethane - Temperature range of application 30?F to 110?F (-1?C to 43?C) - 4,000 psi compressive strength in 1 hour (neat) - Viscosity less than 100 cP - 12 month shelf life Uses Include: -Quick repair of interior/exterior hairline cracks in concrete -Spall repair when mixed with aggregate -Industrial floor repair for hightraffic areas -Parking structures and concrete bridge repair -
Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks. Used to fill interior/exterior control joints or new construction saw joints on horizontal concrete surfaces. Characteristics: - Protects joint edges from spalling due to wheeled traffic - For exterior applications when minimal joint movement from thermal cycling will occur - Treated joints can be opened to traffic in 90 minutes at 75?F (24?C) - Wide application and service temperature range - Material Properties - VOC compliant formulations - Shore A hardness supports traffic - Self-leveling, low viscosity system - 18 month shelf life -
Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks. Used to fill interior/exterior control joints or new construction saw joints on horizontal concrete surfaces. Characteristics: - Protects joint edges from spalling due to wheeled traffic - For exterior applications when minimal joint movement from thermal cycling will occur - Treated joints can be opened to traffic in 90 minutes at 75?F (24?C) - Wide application and service temperature range - Material Properties - VOC compliant formulations - Shore A hardness supports traffic - Self-leveling, low viscosity system - 18 month shelf life -
Multi purpose, two component, moisture insensitive, epoxy repair paste, overhead and vertical repair, cartridge & bulk packaging, 1:1 ratio, application temperatures from 40 Deg. F to 110 Deg. F
-
Fast Curing Cold Weather Doweling Adhesive Characteristics Include: - 100% styrene free (no carcinogens), low VOC content - Adhering dowel bars and tie bars for full depth concrete repairs - Fast full cure time in cold temperatures, 3 hours @ 23 ?F (-5 ?C) - Wide service temperature from -40 ?F to 176 ?F (-40 ?C to 80 ?C) - Available in 10 oz. Unicartridge and 28 oz. Plural Component cartridges - Can be installed down to 15 ?F (-9 ?C) - Moisture insensitive - ASTM C881-14 Type II, Grade 3, Class A & B with exceptions - Non-sag consistency - 18 month shelf life -
High modulus, two component, Crack Injection Epoxy for concrete repair. Characteristics: - Inject into fine and medium crack (1/8" to 1/4") - Moisture tolerant - low viscosity (500cps) - self leveling - low surface tension allows for deep penetration into concrete cracks - plural component cartridge packaging or bulk units - ASTM C881 Type I, II, IV & V Grade 1, Class C; - AASHTO M235 -
A two-component, very low viscosity, Polyurethane hybrid formulation specially designed for quick repairs of hairline cracks and spalls in concrete substrate. CSR is a fast curing product to reduce downtime where return-to-service in needed. The CSR-LPL is a long potlife version of the CSR product. Use the CSR-LPL when aggregates are use to repair large spalls or deep holes in concrete floors. Characteristics: - Self leveling - Ultra low viscosity for deep penetration into craks resulting in a superior bond - High compressive strength (4,629 psi in one hour) - Easy 1:1 ratio mix - Available in 9 oz. Uni-cartridge or 22 oz. plural component cartridges or bulk packaging - Can be used with powder pigments for color matching - Application temperatures from 30 to 110 Def. F - Repaired cracks and spalls can be opened to traffic in less than 60 minutes - CSR-LPL long potlife facilitates adding aggregates for mortar repairs Uses Include: - Quick repair of interior and exterior hariline cracks -Quick repair of spalls when mixed with a specialty aggregate -industrial and commercial flood repairs for application with high volume traffic - Parking structure repairs - Concrete bridge repair -
High Modulus, two component, crack injection epoxy for concrete repair Characteristics: - Inject into to cracks from 1/4" to 3/8" wide - Moisture tolerant - Cures with virtually no shrinkage and bonds to most surfaces - Plural component cartridge packaging or bulk packaging - ASTM C881 Type I, II, IV & V Grade 1, Class C; - AASHTO M235
-
Multi-Purpose, rapid cure, epoxy bonding and repair product Characteristics: - Non Sag - High strength bonding agent for materials including concrete, brick, wood, stone and block - Non-sag patching material for cracks and small spalls, great for overhead and vertical repair - Can be used as an adhesive or filler - Cured surface can be sanded and painted - Rapid initial 3 hour cure at room temperature - Used as a capping paste for injection processes - Used as a port adhesive for crack injection process - Unicartridge packaging for easy installation with standard caulking gun(14:1 Recommended) - Moisture insensitive, can be used on damp surfaces and will cure underwater - Concrete gray color - 24 month shelf life - See MIRACLE BOND 1450 for bulk packaging -
Super Low Viscosity (195cps), 2-component epoxy adhesive perfect for gravity-feed repair of hairline to fine width horizontal cracks. It can be used in temperatures between 50?F - 100?F for a variety of repair projects including vertical crack repair using injection ports in conjunction with a capping paste. Its bonding and sealing capabilities for interior and exterior slabs are exceptional. It can also be used as an epoxy mortar for spall repair when mixed with aggregate. Characteristics: - moisture insenitive for use in damp enviroments - Super low viscosity (195cps) and low surface tension allows it to deeply penetrate hairline to fine cracks. - plural component cartidge or bulk unit packaging - 100% solids, solvent free system - zero VOC content - excellent for small concrete spall repair or large spall with aggregate extension -
High-Strength DOT Anchoring Epoxy Characteristics: - Long working time, 24 minutes @ 75?F (24?C) - Withstands freeze-thaw conditions - Multiple embedment depth design tables - Extensive coast to coast DOT approvals, including Caltrans - Low VOC, 2:1 mix ratio epoxy - Moisture insensitive allowing installation and curing in damp environments - ASTM C881-14 Type I, II, IV & V Grade 3, Class A, B & C - 28 month shelf life Uses Include: - Anchoring threaded rod, bolts and rebar dowels into concrete -short and long term tensile anchoiring, including wind, seismic, and shear forces in accordance with allowable stress design (ASD) - Grouting dowel bars and tie bars for full depth pavement repairs - Bonding agent for fresh to hardened concrete and hardened to hardened concrete -
High Strength Anchoring Epoxy with multiple DOT approvals Characteristics: little or no odor, high modulus, Withstands freeze-thaw conditions, Anchoring threaded rod, bolts and rebar dowels into concrete - Unicartridge / Plural component cartridge or Bulk papckaging available, Standard working time, 20 minutes @ 75?F (24?C) Wide in-service temperature range 35 Deg F to 180 Deg F, Low VOC, 1:1 mix ratio epoxy - Moisture insensitive allowing installation and curing in damp environments - ASTM C881-14 Type I, II, IV & V Grade 3, Class A, B & C - 28 month shelf life -
Two-Component, low-VOC (60 Grams/Ltr.), water-borne epoxy non-slip coating with a fine grit abbrasive. It is perfect for barefoot and recreational traffic areas such as pools, locker rooms, showers, pleasure boats, docks, laundries, walkways and decks. Its high rate of coverage makes it an economical choice. Characteristics: - is self-sealing - enhanced cleanability - chemical resistant - excellent for light industrial and institutional service areas - requires a priming system (PS 100 WB) Available Colors: White Tint Base & Neutral Tint Base
-
Two Component, Heavy Duty epoxy with Kevlar is formulated for maximum durability under heavy vehicular traffic. It?s resistant to fire, acid, alkali, solvent, grease, oil, salt water, detergent, alcohol, gasoline, hydraulic fluid, and weather. This makes it ideal for ramps, walkways, forklift traffic, loading docks, ships, stadiums, garages? wherever you need an extremely tough and tenacious anti-slip surface. Originall designed for flight deck operations of naval aircraft carriers where heavy impact resistance is required for repeated landing of aircraft. Characteristics: - high impact resistant - high chemical resistance to acids, alkalis, solvents, grease, oil, salt water, jet fuels, gasoline, detergents, and hydraulic fluids - simple to apply - apply's to metal, concrete, fiberglass, and wood substrates - requires a priming system (PS 100 WB) Available Colors: Gray and Black -
Two Component epoxy anti-slip coating, 100% Solids, Zero VOC, designed for the most demanding environments. AS-2500 provides superior resistance to chemicals and heavy traffic while providing safer footing and traction for rolling equipment. It is odorless and can be used in odor sensitive applications such as wineries, food processing facilities, hospitals and confined areas. Now available in a low temperature cure version for rapid return to service. The LTC hardener can be used at temperatures down to 35?F allowing for application in refrigerated areas or cold environments. Fire retardant in the cured state, AS-2500 resists fire, most acids, alkaline, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, and other hydraulic fluids. Characteristics: - 100% Solids - Zero VOC?s - odorless for sensitive application areas - high chemical resistance - Manufactured with Substainable Raw Materials - Available in Two Versions (Standard Cure & Low Temperature Fast Cure) - Custom colors are available with minimum order requirements - application on concrete, metal, fiberglass, or wood substrate - requires a primer system (PS 100 WR or MS7CZ or MS11CZLT Standard Colors: Gray, Black, and Safety Yellow. -
Two Component epoxy anti-slip coating, 100% Solids, Zero VOC, designed for the most demanding environments. AS-2500 provides superior resistance to chemicals and heavy traffic while providing safer footing and traction for rolling equipment. It is odorless and can be used in odor sensitive applications such as wineries, food processing facilities, hospitals and confined areas. Now available in a low temperature cure version for rapid return to service. The LTC hardener can be used at temperatures down to 35?F allowing for application in refrigerated areas or cold environments. Fire retardant in the cured state, AS-2500 resists fire, most acids, alkaline, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, and other hydraulic fluids. Characteristics: - 100% Solids - Zero VOC?s - odorless for sensitive application areas - high chemical resistance - Manufactured with Substainable Raw Materials - Available in Two Versions (Standard Cure & Low Temperature Fast Cure) - Custom colors are available with minimum order requirements - application on concrete, metal, fiberglass, or wood substrate - requires a primer system (PS 100 WR or MS7CZ or MS11CZLT Standard Colors: Gray, Black, and Safety Yellow.
-
Single Component, Epoxy Ester (HAPS Free) non-slip floor and deck coating designed for heavy pedestrian grade traffic Characteristics: - easy to apply - rapid curing - fire retardant in the cured state - partially used materials can be resealed for up to 24 month shelf life - resists gasoline, oil, acids, alkaline and aliphatic solvents - Colors Available: Gray, Black, Safety Yellow and Two Tint Bases Available Colors: Gray, Black, Safety Yellow, and Two Tint Bases (White & Neutral) -
Single Component, low VOC (32 Grams/Ltr.) elastomeric acrylic anti-slip compound for floor and deck coating application for pedestrian traffic Characteristics: - easy to apply - dries quickly - water based product - can be used right out of the can and resealed for future use - optimum adhesion to to asphalt, concrete, wood, and metal surfaces - Colors Available: Gray & Black and Two Tint Bases: White and Neutral -
CHOCKFAST Black is a specifically formulated 100% solids, inert filled, pour-in-place, casting compound developed for use as a chocking material for industrial applications. It is a cost-effective method of maintaining permanent precise alignment of critical equipment. It will withstand severe environments involving high physical and thermal shock.This unique product is used under gas and diesel engines, compressors, generators, turbines, motors, pumps and various other types of equipment. CHOCKFAST Black is ideal for use under hot running reciprocating and rotating machines because of its excellent resistance to creep and fatigue at high operating temperatures. It is non-shrinking and has a very high impact and compressive strength. Resin chocks made with CHOCKFAST Black reduce possible bearing or crankshaft damage because they: Characteristics: - Minimize heat build-up on foundations - Assure precise alignment and unsurpassed contact with bedplates - Provide a high coefficient of friction to help hold engines down tight. - The excellent flow-ability of CHOCKFAST Black allows it to fill voids in the chock area and conform to all surface irregularities. - Packaging (2.5 Gallon Kit ) Coverage - 265 Cu.In
-
CHOCKFAST Blue is a two-component, aggregate-filled, pourable epoxy grouting compound for severe applications. This highly developed material is often used to replace steel soleplates or rails and is used as an epoxy foundation capping material that is resistant to high operating temperatures. Its unique properties permit usage directly under highly stressed machinery mounting surfaces. Typical applications include the grouting of diesel engines, compressors, generators, gears, pumps and most other heavy equipment. CHOCKFAST Blue is unexcelled under heavy reciprocating and rotary machinery due to its excellent resistance to creep, fatigue and shock forces. It is also an excellent support surface for the CHOCKFAST Black or Chockfast Orange epoxy chocking compounds. Characteristics: - High chemical resistance - High resistance to creep - Resistant to high operating temperatures - High resistance to fatigue and shock forces - Negligable shrinkage - Excellent surface load bearing properties for the use of epoxy chocks - Packaging (5 Gallon Kit ) Coverage - 800 Cu.In -
CHOCKFAST Gray (PR-610FR) is a specially formulated 100% solids, two component, inert filled compound developed for use in chocking non-precisely aligned equipment or in setting anchor bolts in concrete. The compound is designed to withstand severe marine and industrial environments involving a high degree of both physical and thermal shock. CHOCKFAST GRAY was developed as a chocking compound for use under marine deck machinery, pumps, generators and steering gears. Industrially, the compound is used under diesel engines, generators, compressors, pumps, turbines, bearing blocks, crane rails and numerous other applications. It is also used extensively in the setting of anchor bolts into concrete. Characteristics: - Excellent flowability and non-shrink properties - Very high impact strengths - Very high compressive strengths - Approved for marine use by A.B.S., Coast Guard, Lloyd's Register and other regulatory agencies. - Non-corrosive properties in severe marine environments - High thermal shock resistance - High tensile strengths - High fire resistance (self extinguishing) - Packaging (1 Gallon Kit ) Coverage - 187 Cu.In (5 Gallon Kit) Coverage - 816 Cu. In -
CHOCKFAST HF Epoxy Grout is the next generation, three-component, epoxy-based grouting compound designed to improve the installation of grout in the most difficult machinery and equipment installations. As our latest product in a long line of successful machinery grouting and chocking compounds, CHOCKFAST HF Epoxy Grout is ideal for establishing the long-term support and alignment required by the most demanding industrial machinery installations and operational conditions. CHOCKFAST HF Epoxy Grout is available in red or a neutral white color. Characteristics: - Fluid consistency allows large quantities of grout to be pumped using peristaltic and worm drive (progressive cavity) type pumps. - Because it is pumpable, it is possible to reach areas with very limited access such as those found in skid package applications or remote applications. - No need to reduce aggregate loads to improve flow. Reducing aggregate results in loss of physical properties. - Allows for high level of placement control. - Can also be poured using traditional placement methods (Flow Cones or Head boxes) - Pumping grout increases placement rates and productivity while reducing installation equipment costs. - High effective bearing area (>95%), extremely low shrinkage rates. - Fast cure schedule allows quicker return to service. - Greatly reduces the amount of ?over the flange? waste. - Maintains physical properties even at shallow depths. - Can be used in conjunction with very large aggregates to fill large voids in skid packages. - Packaging (2.5 Cu. Ft ) Coverage - 4,320 Cu.In -
CHOCKFAST ORANGE (PR-610TCF) is a specially formulated 100% solids, two component inert filled casting compound developed for use as a chocking comound or potting material. CHOCKFAST is designed to withstand severe marine and industrial environments involving a high degree of both physical and thermal shock. The compound is non-shrinking and has very high impact and compressive strength. The Chockfast Orange is designed to be applied in various ambient temperatures with controlled exotherm temperatures. CHOCKFAST ORANGE was developed as a chocking or grouting compound for use under marine main propulsion machinery in depths of ?? to 4? (12mm to 100mm). The compound is used under diesel and gas engines, reduction gears, generators, compressors, pumps, precision bearing blocks, crane rails, and numerous other applications. Characteristics: - High physical compressive strengths - Very high impact strengths - Designed to withstand a high degree of both physical and thermal shock - Will hold very tight tolerances for precise maintenance of machinery alignment - Approved or accepted for its intended marine use by American Bureau of Shipping, Lloyd's Register, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd and most other major regulatory agencies worldwide. - Very flowable material (Can be injected under baseplates @ 1/8" gap) - Simple mixing & application without the need for special tooling - Excellent for filling voids and conforming to all irregularities for a perfectly fitted chock. - Packaging (1 Gallon Kit ) Coverage - 120 Cu.In (2.5 Gallon Kit) Coverage - 260 Cu. In. -
CHOCKFAST Red is a three-component, high strength, 100% solids, epoxy grouting compound used to replace oil saturated concrete during the restoration of large concrete foundation for large machinery.CHOCKFAST Red has an extremely high compressive strength and very low exotherm properties allowing for grout pours in excess of 18" deep in a single lift. This along with negligible shrinkage makes it ideal for installing critically aligned machinery within very close tolerances. CHOCKFAST Red has the following advantages when compared to conventional cement grouts. Characteristics: - Low coefficient of thermal expansion (Lowest in the industry) - Impervious to oil - Fully cures at least ten times as quickly as compared to cement grouts - No mixing ratios to measure - Grouts machinery in final aligned position - High physical strength - High impact strength - Resistance to chemicals - Strong bond to metal and concrete - Unaffected by weathering and freeze / thaw cycling - Stated physical properties assured - Superior resistance to fatigue - Packaging (1.6 Cu. Ft. Kit ) Coverage - 2, 765 Cu.In