Grout Pumping

  • Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. These fittings are manufactured from polypropylene plastic and work in a temperature range from -20 Deg. to 150 Deg. F. Used specifically for lay-flat hose with hose clamp connections. Characteristics: - Connections: Male Plug w/ barbed male end for layflat hose applications - Operating temperatures: -20 to 150 Deg. F - Maximum operating pressure is 125 psi - For use with polyurethane, Polyethylene, PVC, and Rubber hose - Meets Federal Specification A-A-59326 - Available with locking or Non-Locking Levers
  • Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. These fittings are manufactured from polypropylene plastic and work in a temperature range from -20 Deg. to 150 Deg. F. F. Characteristics: - Connections: Female socket w/ NPT female end - Operating temperatures: -20 to 150 Deg. F - Maximum operating pressure is 125 psi - For use with Lay-Flat polyurethane, polyethylene, PVC, and rubber hose - Meets Federal Specification A-A-59326 - Available with locking or Non-Locking Levers
  • Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. This high pressure hose is used directly out of the pump to prevent the pinching of the hose during reloaction of hose during application. The pinching of the hose can lead to hose "blow-out" and make e real mess on the jobsite.
  • Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. This low pressure hose is used for the application of very flowable cement grouts only. Manufactured from PVC and has a service temperature of -5 Deg. to 170 Deg. F. Characteristics: - Material: PVC - Service Temperatures: -5 Deg. to 170 Deg. F - Pressure Ratings: 80 psi - Color: Blue - Compatible Hose Fittings (CamLoc Hose Barb)
  • Designed for use in a grout pumping application for quick connect/disconnect of hoses for product installation or easy removal to clean out hoses after application. Also makes it simple to add additional lengths as required for the grout application. This medium pressure hose is used for the application of flowable cement grouts and epoxy grout compounds. Manufactured from PVC and has a service temperature of -5 Deg. to 170 Deg. F. Characteristics: - Material: PVC - Service Temperatures: -5 Deg. to 170 Deg. F - Pressure Ratings: 150 psi - Color: Red - Compatible Hose Fittings (CamLoc Hose Barb)
  • General purpose Worm-drive clamps for firm hose and tubing. 410 Stainless Steel for good corrosion resistance. General Uses: - Attaching our layflat hose to our Quick-connect fittings for pumping grouts
  • Portable rotor stator pump for mortars and cementitious materials. Small and compact, yet large enough to get the job done. Say goodbye to buckets. No matter what type of mortar you?re pumping, the ToughTek P30 Mortar Pump provides long-lasting durability and rugged performance ? and handles a wide range of mortar materials. Its compact design and light weight make it easy to transport and use on the jobsite. Reduce manual labor and start pumping with the P30 Mortar Pump instead. Formerly named Machine Technologies P25. Characteristics: - Simple to use, easy to move - Variable pump output for adjustment of material output - Pumping Distance: 100 feet - Pumping Height: 60 feet - Reversible pump direction - Hopper capacity: 16 Gallon (2.2 Cu. Ft.) - Power requirements: 230VAC 30A-1PH - Easy to take apart for cleaning and transport - Easy to maintain with long wearing parts and component - Replacement parts stocked for all pumping units Uses Include: - Five Star Fluid 100 - Five Star Special Grout 100 - Five Star HTR Grout - Five Star Special Grout 400 - Five Star Hybrid Grout - Five Star Structural Concrete - Dayton Superior 1107 Grout - Dayton Superior Precision Grout - Self-leveling underlayment - General cement Grouts - Epoxy-based mortars - Waterproofing - Epoxy cladding - Non-slip coatings - Concrete repair mortars
  • Portable rotor stator pump for mortars and cementitious materials. Small and compact, yet large enough to get the job done. Say goodbye to buckets. No matter what type of mortar you?re pumping, the ToughTek P20 Mortar Pump provides long-lasting durability and rugged performance ? and handles a wide range of mortar materials. Its compact design and light weight make it easy to transport and use on the jobsite. Reduce manual labor and start pumping with the P20 Mortar Pump instead. Formerly named Machine Technologies P25. Characteristics: - Simple to use, easy to move - Variable pump output for adjustment of material output - Pumping Distance: 100 feet - Pumping Height: 60 feet - Reversible pump direction - Hopper capacity: 16 Gallon (2.2 Cu. Ft.) - Power requirements: 230VAC 30A-1PH - Easy to take apart for cleaning and transport - Easy to maintain with long wearing parts and component - Replacement parts stocked for all pumping units Uses Include: - Five Star Fluid 100 - Five Star Special Grout 100 - Five Star HTR Grout - Five Star Special Grout 400 - Five Star Hybrid Grout - Five Star Structural Concrete - Dayton Superior 1107 Grout - Dayton Superior Precision Grout - Self-leveling underlayment - General cement Grouts - Epoxy-based mortars - Waterproofing - Epoxy cladding - Non-slip coatings - Concrete repair mortars
  • Portable rotor stator pump specifically designed for the installation of epoxy grouts with low aggregate loading. This includes our Five Star DP/PG or Chockfast HF products. Fully capable for mortars and cementitious materials as well. A larger scale than our P30 pump with a much larger hopper size (60 Gallon - .75 Cu. Yd.)this machine is small and compact, yet large enough to get the job done. Say goodbye to buckets. No matter what type of mortar you?re pumping, the model ToughTek P30X or P30XHT Mortar Pump provides long-lasting durability and rugged performance ? and handles a wide range of mortar materials. Its compact design and light weight make it easy to transport and use on the jobsite. Reduce manual labor and assure full frame contact and start pumping with the P30X mortar pump & P30XHT epoxy pump instead. Characteristics: - Simple to use, easy to move - Variable pump output for adjustment of material output - Pumping Distance: 100 feet - Pumping Height: 60 feet - Reversible pump direction - Hopper capacity: 16 Gallon (2.2 Cu. Ft.) - Power requirements: 230VAC 30A-1PH - Easy to take apart for cleaning and transport - Easy to maintain with long wearing parts and component - Replacement parts stocked for all pumping units Uses Include: - Five Star DP/PG epoxy grout - Chockfast HF epoxy grout - All cement grouts and specialty or hybrid concretes.
  • Portable rotor stator pump specifically designed for the installation of epoxy grouts with low aggregate loading. This includes our Five Star DP/PG or Chockfast HF products. Fully capable for mortars and cementitious materials as well. Small and compact, yet large enough to get the job done. Say goodbye to buckets. No matter what type of mortar you?re pumping, the ToughTek P30HT Mortar Pump provides long-lasting durability and rugged performance ? and handles a wide range of mortar materials. Its compact design and light weight make it easy to transport and use on the jobsite. Reduce manual labor and assure full frame contact and start pumping with the P30HT epoxy pump instead. Formerly named Machine Technologies P25. Characteristics: - Simple to use, easy to move - Variable pump output for adjustment of material output - Pumping Distance: 100 feet - Pumping Height: 60 feet - Reversible pump direction - Hopper capacity: 16 Gallon (2.2 Cu. Ft.) - Power requirements: 230VAC 30A-1PH - Easy to take apart for cleaning and transport - Easy to maintain with long wearing parts and component - Replacement parts stocked for all pumping units Uses Include: - Five Star DP/PG epoxy grout - Chockfast HF epoxy grout - All cement grouts and specialty or hybrid concretes
  • Portable rotor stator pump specifically designed for the installation of large volumes of cement grouts or as a staging pump on the ground to lift volumes of product to a secondary pump for product application up to ten stories high. Capable of producing high output at 600 psi (41 bar) of pumping pressure and can easily move materials up to 400 feet. Characteristics: - Simple to use, easy to move - High output (300 Bags per hour based on 50 lb. bags) - Variable pump output for adjustment of material output flow - Pumping Distance: 400 feet - Pumping Height: 150 feet - Reversible pump direction - Hopper capacity: 16 Gallon (2.2 Cu. Ft.) - Power requirements: 230VAC 30A-1PH - Easy to take apart for cleaning and transport - Easy to maintain with long wearing parts and component - Replacement parts stocked for all pumping units.
  • Use the ToughTek MP40 to mix, pump and apply pre-blended, self-leveling powder materials with a single, easy-to-use machine. Integrated design increases productivity while saving on labor costs. Innovative water-metering system regulates the flow rate for the most consistent material mix.
  • Use the ToughTek MP40 to mix, pump and apply pre-blended, self-leveling powder materials with a single, easy-to-use machine. Integrated design increases productivity while saving on labor costs. Innovative water-metering system regulates the flow rate for the most consistent material mix.

Title