-
The 1107 Advantage Grout DOT is a non-shrink, noncorrosive, non-metallic cementitious grout that is designed to provide a controlled, positive expansion to ensure excellent bearing area (EBA). 1107 Advantage Grout DOT can be mixed from a dry pack to a fluid consistency. Uses include: interior and exterior grouting of structural column base plates, pump and machinery bases, anchoring bolts, dowels, bearing pads and keyway joints. Industries served: paper mills, petrochemical refineries, food plants, aerospace, water/wastewater treatment plants, gas transmission, power generation, etc. Characteristics Include: - Controlled, Net Positive Expansion - Non Shrink - Non Metallic/Non Corrosive - Dry Pack to Pourable Consistancy, Pumpable - InteriorEexterior applications -
Sure-Grip High Performance Grout is a non-shrink, non-corrosive, non-metallic cementitious grout designed to provide a controlled, positive expansion and to ensure excellent bearing area. Sure-Grip High Performance Grout can be mixed in a plastic or flowable consistency. Uses include: interior or exterior grouting of architectural and structural precast concrete components, structural column base plates, machinery bases, anchoring bolts, cable anchorages, dowels, bearing pads, keyway joints, crane rails or anywhere a high quality engineered grout is required. Industries served: paper mills, petrochemical refineries, food plants, aerospace, water/wastewater treatment plants, gas transmission, power generation, rail, transportation, infrastructure, etc. Characteristics Include: - High compressive strength quickly ? 5,000 psi in one day - Less downtime for machines/finish projects sooner - High ultimate compressive strength ? 10,000 psi in 28 days - Non-metallic/non corrosive - High density - Low water requirements - High fluidity/pourable/pumpable - Interior/exterior applications - Approved by numerous state DOTs - Tested and Certified by WQA to NSF/ANSI 61 -
Five Star EZ-Cure Repair Mortar is a rapid-turnaround, fiber reinforced, cementitious, repair mortar for vertical and overhead structural repairs. It requires "No Wet Cure" or curing compounds and may be extended with course aggregate to make a fast setting concrete for deeper placements. Good for horizontal or formed vertical repair. Characteristics: - High early strength - No wet cure or curing compounds needed - Excellent freeze/thaw resistance -No Wet Cure or Curing Compounds -Course Aggregate Extension -Fiber Reinforced -Moisture Sensitive Coatings can be applied in 24 hours Uses Include: Horizontal Repairs, general repairs of concrete structures, steps and walkways, parking structures, formed vertical repairs
-
When mixed with Five Star EZ-Cure Repair Mortar, Five Star EZ-Cure Repair Mortar w/ V/O Additive forms a rapid-turnaround, cementitious repair mortar for vertical and overhead structural repairs. Five Star EZ-Cure Repair Mortar V/O Additive comes in a convenient 2.5 lb. pouch that is easy to store and takes up less space. Its revolutionary packaging design extends the application of Five Star EZ-Cure Repair Mortar by eliminating the need to carry separate products to cover all applications. Requires no wet cure or curing compounds. Chacteristics Include: - Vertical and overhead application - High early strength - No wet cure or curing compounds needed - Excellent freeze/thaw resistance
-
Five Star Rapid Surface Repair (RSR/EZM) is a self-leveling, low viscosity, two-part liquid polyurethane-hybrid polymer. When supplemented with its proprietary blended aggregate, this product is used to repair and rehabilitate concrete and asphaltic concrete pavements. The enhanced polymer is high performance, rapid setting, and can be used to make an impact and traffic resistant polymer concrete. Within minutes of placement, durable, long-lasting repairs are able to handle vibration, heavy traffic, and thermal movement. Characteristics: - No priming required to bond to concrete, asphalt, steel or wood - Waterproof, chemically resistant membrane protects substrates from freeze-thaw spalling - Use neat or with aggregate - Stops further corrosion of reinforcing steel - Traffic ready in as little as 30 minutes - Very low odor - Make repairs year round -
Five Star High Strength Grout is the industry?s leading cement-based, non-metallic, non-shrink grout for supporting machinery and applications requiring precision alignment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star High Strength Grout exhibits positive expansion and meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07, and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40?F - 90?F (4?C - 32?C). Characteristics Include: - Ultra-high 1, 7, and 28 day compressive strengths - 95% Effective Bearing Area (EBA) is typically achieved following proper grouting procedures - Placement versatility: can be poured, wet set or dry packed - Permanent support for machinery requiring precision alignment - Nonshrink from the time of placement Uses Inlcude:Grouting of machinery and equipment under high loads, grouting of structural steel and precast concrete panels, support of tanks and vessels, wind trubines, compressors and turbine equipment, grouting of anchors and dowels, etc. -
Five Star Highway Patch is a one component, fast setting hydraulic cement material ideal for horizontal repairs of concighways and Bridgesrete in traffic areas. Five Star Highway Patch provides resistance to oil, grease, gasoline, salts and other chemicals found in the transportation environment. Characteristics Include: - High early strength - One component/ease of use - Open to traffic in two hours - Freeze/thaw resistance - Resistant to salts - Cold weather installation - Coarse aggregate extension Uses Include: highways and bridges, parking decks and ramps, airport runways and taxiways, expansion joint rebuild, dowel bar retrofit, cold weather repairs, etc. -
Fast Traffic Area Repair for Cold Weather. Five Star Highway Patch Winter is a one component, fast setting hydraulic cement material ideal for horizontal repairs of concrete in traffic areas for cold weather conditions. Five Star Highway Patch Winter provides resistance to oil, grease, gasoline, salts and other chemicals found in the transportation environment. Characteristics Include: - High early strength - One component/ease of use - Open to traffic in three hours - Freeze/thaw resistance - Adjustable to working time - Resistant to salts - Cold weather installation - Coarse aggregate extension Uses Include: highways and bridges, parking decks and ramps, airport runways and taxiways, eppansion joint restoration, dowel bar retrofit, cold weather applications, etc. -
Five Star Highway Patch FR is a one component, fiber-reinforced, fast-setting, high strength, cement-based repair mortar designed for transportation applications where high early strength gain is needed to reduce down time. Five Star Highway Patch FR combines a unique chemistry requiring no wet cure or curing compounds along with fiber reinforcement for excellent crack resistance and long-term durability. Characteristics Include: - High early strength - One component for ease of use - Open to traffic in three hours - Freeze/thaw resistance - No Wet Cure or Curing Compounds Required - Resistant to salts - Coarse aggregate extension Uses Include:heavy traffic areas, warehouse floors, loading ramps,sidewalks, airport runways and taxiways, parking decks and ramps, pier decks with high truck traffic, etc.
-
Five Star HTR Grout is a unique cement based grout for supporting equipment and structural baseplates in high temperature environments. Five Star HTR Grout can be poured into place, gains strength rapidly and can be exposed to 1000?F (538?C) in three hours and up to 2400?F (1316?C) after a 7-day curing procedure. Five Star HTR Grout shows positive expansion when tested in accordance with ASTM C 827. Five Star HTR Grout meets the performance requirements of ASTM C 1107-02 and CRD-C 621-93 specs for nonshrink grout grades A, B, and C. Characteristics Include: - Thermal shock resistant - Resistant to sulfates - High temperature resistance - High early strengths - Does not fall below original placement volume per ASTM C 1107 Uses Include: areas of high temperature exposure, thermal cycling up to 2,400 Deg. F, rapid turn-around during shutdowns, coker kiln and foundary applications, etc. -
Summerset is an additive which extends the working time and retards the set of certain Five Star grouts and rapid setting hydraulic cement products. Summerset should be used when working in hot weather or placing a large amount of material at one time to provide ample working time to place and finish the material. For use only with specific Five Star rapid setting products which call for Summerset by name such as Five Star Structural Concrete , Five Star Instant Grout, and Five Star Highway Patch. Characteristics Include: - extended working time in warmer weather 30 to 40% - does not effect the physical properties of the product