-
The Stretch-N-Go Hog simultaneously stretches and installs wire fencing without all the time and labor-intensive work. The dispenser is capable of stretching up to 1/4 mile, or the equivalent of two 660' rolls or four 330' rolls, of woven wire without reloading. The woven wire is stretched while guiding the Stretch-N-Go via Skid-Steer. The wire is held upright and taut against the posts while a person walks behind and secures the fence. Coated tension rolls protect wire during stretching while an adjustable brake system provides tension options. This equipment also saves on manpower; the Stretch-N-Go only requires two operators for fence installation. Pockets are built into the Stretch-N-Go for forklift access. A 4' model is available. Specifications - Stretches wire as it dispenses - Weighs 1210 lb. (549 kg) - Max. gross weight: 5,210 lb. (2363 kg) - Capacity: four rolls of 330' or 2 rolls of 660' of wire - Sealed with powder coat paint - Load with skid steer - Adjustable braking system for desired tension - Optional barb wire attachment (up to 6 rolls) - A 6ft. model is available - Dimensions (D ? W ? H) 48" ? 86" ? 66 1/8" -
The optional Barbwire Hog mounts onto the Stretch-N-Go and is specifically designed to stretch barbwire. This dispenser features enough spools to have up to six rolls of barbwire unrolling and stretching at once. Like the Stretch-N-Go Hog, coated tension rolls protect the wire during stretching and an adjustable brake gives operators control of tension preferences. -
Our Mixers homogeneously mixes all heavy aggregates on the job site giving you as much time as you need, for any project?before the precast hardens. Our mixers make setting the final product a seamless process. The mixers come in three different sizes (7, 9, and 12 Cu.Ft) to handle low to high volumes. The manual dump mixers are triple use for epoxy and cement grouts, cement mortar and concrete products. They feature our #80 chain-driven system and are designed with bearings spaced from the seals to improve bearing durability. Available drives include Gas engine, electric motor (Standard and Explosion Proof). Specifications: 1.5 to 2 bag capacity or 7 cu.ft. (.2 m3) 7.9 HP Honda Gas Engine (Standard) ) Will mix up to 1" (2.54 cm) aggregate Discharges up to 48" high w/ adjustable legs 48" load height Manual recoil start 3/16" drum thickness Empty weight 850 lbs. (386 kg) 4" ? 6" rectangular structural tubing 1 ?" solid steel shaft 2" ball hitch Overall dimensions (L ? W ? H) 73" (107" with tongue) ? 47" ? 58" (67" with dump handle) Options 1.5 HP Electric Motor - 1PH/115V (Household electric) Pintle hitch available Removable leg kit for stability mixing paddles for epoxy grouts -
Our Mixers homogeneously mixes all heavy aggregates on the job site giving you as much time as you need "for any project" before the precast hardens. Our mixers make setting the final product a seamless process. The mixers come in three different sizes (7, 9, and 12 Cu.Ft) to handle low to high volumes.
The manual dump mixers are triple use for epoxy and cement grouts, cement mortar and concrete products. They feature our #80 chain-driven system and are designed with bearings spaced from the seals to improve bearing durability. Available drives include Gas engine, electric motor (Standard and Explosion Proof). Specifications: 2 to 3 bag capacity or 9 cu.ft. (.25 m3) 7.9 HP Honda Gas Engine (Standard) Will mix up to 1" (2.54 cm) aggregate Discharges up to 20" high 56" load height Manual recoil start 3/16" drum thickness Empty weight 970 lbs. (440 kg) 4" ? 6" rectangular structural tubing 1 1/4" solid steel shaft 2" ball hitch Overall dimensions (L ? W ? H) 76" (110" with tongue) ? 47" ? 67" (77" with dump handle) Options: 5 HP Electric Motor - 1PH/230V 5 HP Electric Motor - 3PH/230V 5 HP Electric Motor - 3PH/460V Removable leg kit for stability Water bar for easy filling - optional, re-settable meter Pintle hitch available Explosion proof control center for hazardous environments -
Our Mixers are engineered for job site durability and easy operation. Mixers are designed as onsite mix stations and intended for low loading and high dumping to further reduce labor fatigue. Our innovative, patented system design uses rubber blades on vertical paddles to allow reversibility, prevent splashing and reduce clogging issues typical of other mixers on the market. Our products are known across the industry as the leading equipment for custom design, high quality, superior performance and personnel safety. Our Mud Hog Mixing Stations are the premier standard for cement and epoxy grouts, repair mortar and hybrid concrete workhorse mixers. We also supply a series of delivery and support systems for each mixer designs with a range of capabilities and options to make the job easier. Characteristics: Triple use: Grout (Cement & Epoxy), Concrete (Standard & Hybrid) and Mortars Becomes a portable batch plant for mixing grout on site Compacts to fit into standard 8' truck bed for simple transportation Ideal for use with individual bag mixes or silo mixes Hydraulic dump and drive Reversible mixing paddles prevent clogging Vertical paddle orientation to minimize splashing and cut through material Loads below waist level and dumps high with adjustable heights to optimize ergonomic operation Fork pockets accessible from all sides Adjustable legs and outriggers for stability Dumps into the Grout Hog for easy masonry block filling Manual recoil and electric start Specifications: 2 to 3 bag capacity or 9 cu.ft. (.25 m3) 8.5 HP Honda Gas Engine (Standard) Will mix up to 1" (2.54 cm) aggregate Discharges up to 26" high Empty weight 1325 lbs. (601.1 kg) Gross weight with load- (2675 lbs. (1213.4 kg) Hydraulic dump system Hydraulic drive system Manual recoil start 3/16" drum thickness Overall dimensions (L ? W ? H) 94"X33.5"X43.5" Options: 5 HP Electric Motor - 1PH/230V 5 HP Electric Motor - 3PH/230V 5 HP Electric Motor - 3PH/460V Tow Kit with lighting light kit for road safety Solid grating available to minimize dust Add fork pockets for versatility Water bar for easy filling - optional, re-settable meter -
Our Mixers homogeneously mixes all heavy aggregates on the job site giving you as much time as you need, for any project, before the precast hardens. Our mixers make setting the final product a seamless process. The mixers come in three different sizes (7, 9, and 12 Cu.Ft) to handle low to high volumes. The manual dump mixers are triple use for epoxy and cement grouts, cement mortar and concrete products. They feature our #80 chain-driven system and are designed with bearings spaced from the seals to improve bearing durability. Available drives include Gas engine, electric motor (Standard and Explosion Proof). Specifications: 3 to 4 bag capacity or 12 cu.ft. (.34 m3) 11.7 HP Honda Gas Engine (Standard) Will mix up to 1" (2.54 cm) aggregate Discharges up to 20" high 56" load height Manual recoil start 3/16" drum thickness Empty weight 1231 lbs. (550 kg) 4"X7" rectangular structural tubing 1" solid steel shaft 2" ball hitch Overall dimensions (LXW XH) 76" (110" with tongue) 47" x 67" (77" with dump handle) Options: 5 HP Electric Motor - 1PH/230V 5 HP Electric Motor - 3PH/230V 5 HP Electric Motor - 3PH/460V Towing light kit for road safety Removable leg kit for stability Water bar for easy filling - optional, re-settable meter Pintle hitch available Explosion proof control center for hazardous environments
-
EZG's Mud Hogs are engineered for job site durability and easy operation. Mixers are designed as onsite mix stations and intended for low loading and high dumping to further reduce labor fatigue. Our innovative, patented system design uses rubber blades on vertical paddles to allow reversibility, prevent splashing and reduce clogging issues typical of other mixers on the market. Our products are known across the industry as the leading equipment for custom design, high quality, superior performance and personnel safety. Our Mud Hog Mixing Stations are the premier standard for cement and epoxy grouts, repair mortar and hybrid concrete workhorse mixers. We also supply a series of delivery and support systems for each mixer designs with a range of capabilities and options to make the job easier. Characteristics: - Triple use: Grout (Cement & Epoxy), Concrete (Standard & Hybrid) and Mortars - Becomes a portable batch plant for mixing grout on site - Compacts to fit into standard 8' truck bed for simple transportation - Ideal for use with individual bag mixes or silo mixes - Hydraulic dump and drive - Reversible mixing paddles prevent clogging - Vertical paddle orientation to minimize splashing and cut through material - Loads below waist level and dumps high with adjustable heights to optimize ergonomic operation - Fork pockets accessible from all sides - Adjustable legs and outriggers for stability - Dumps into the Grout Hog for easy masonry block filling - Manual recoil and electric start Specifications: 3 to 4 bag capacity or 12 cu.ft. (.34 m3) 11.7 HP Honda Gas Engine (Standard) Will mix up to 1" (2.54 cm) aggregate Discharges up to 49" high Empty weight- 1695 lbs. (768.8 kg) Gross weight with load- 3495 lbs. (1588 kg) Hydraulic dump system Hydraulic drive system Manual recoil and electric start 3/8" drum end and ?" drum wrap thickness Overall dimensions (L ? W ? H) 82" x 42" x 49.5" Options: 10 HP Electric Motor - 1PH/230V 10 HP Electric Motor - 3PH/230V 10 HP Electric Motor - 3PH/460V 9.5 HP Kubota Diesel Engine Water bar for easy filling - optional, re-settable meter Axle kit for portability and towing light kit for road safety -
Our Mixers are engineered for job site durability and easy operation. Mixers are designed as onsite mix stations and intended for low loading and high dumping to further reduce labor fatigue. Our innovative, patented system design uses rubber blades on vertical paddles to allow reversibility, prevent splashing and reduce clogging issues typical of other mixers on the market. Our products are known across the industry as the leading equipment for custom design, high quality, superior performance and personnel safety. Our Mixing Stations are the premier standard for cement and epoxy grouts, repair mortar and hybrid concrete workhorse mixers. We also supply a series of delivery and support systems for each mixer designs with a range of capabilities and options to make the job easier. Characteristics: Triple use: Grout (Cement & Epoxy), Concrete (Standard & Hybrid) and Mortars Becomes a portable batch plant for mixing grout on site Compacts to fit into standard 8' truck bed for simple transportation Ideal for use with individual bag mixes or silo mixes Hydraulic dump and drive Reversible mixing paddles prevent clogging Vertical paddle orientation to minimize splashing and cut through material Loads below waist level and dumps high with adjustable heights to optimize ergonomic operation Fork pockets accessible from all sides Adjustable legs and outriggers for stability Dumps into the Grout Hog for easy masonry block filling Manual recoil and electric start Specifications: 6 to 7 bag capacity or 20 cu.ft. (.57 m3) - ? cubic yard 11.7 HP Honda Gas Engine (Standard) Will mix up to 1" (2.54 cm) aggregate Discharges up to 51" high Empty weight- 2295 lbs. (1041 kg) Gross weight with load- 5295 lbs. (2406 kg) Hydraulic dump system Hydraulic drive system Manual recoil and electric start 3/8" drum end and 5/16" drum wrap thickness Overall dimensions (LxWxH) 96" x 44" x 53" Options: 10 HP Electric Motor - 1PH/230V 10 HP Electric Motor - 3PH/230V 10 HP Electric Motor - 3PH/460V 9.5 HP Kubota Diesel Engine Solid grating available to minimize dust Water bar for easy filling - optional, re-settable meter
-
Grout, Concrete & Mortar Delivery System was developed after more than a decade of development and thousands of field tests to help streamline the installation of grouts and mortars in a multitude of applications for convenience, safety, and efficiency. Each model includes a unique swiveling base that reduces the number of moves required by the forklift. These grout delivery systems can be operated via wireless remotes, allowing operators greater pour precision. Both horizontal and uphill models require only two people for safe operation and complete masonry block fill, one to guide the hose and the other to drive the forklift. The delivery system means no more carrying large buckets of grout to the installation site. Instead, your workers can pour in a 17' radius and easily manipulate the direction without moving the forklift. Cleanup is fast and easy with the removable auger which reduces cleanup to less than 15 minutes. Characteristics: - Two laborers - Three minute set up - 15 minutes clean up - Weight on forklift instead of men - Can grout fill a green masonry joint without harm Specifications: - Standard capacity Cu. yd (1,296 Cu. In) (.57 Cu. Meters) - Material discharge rate of Cu Yd in 2 minutes - Remote control operation (forward/reverse of auger) - 8' (2.44 m) reinforced, collapsible dispensing hose (4" diameter) Standard hydraulic power from skid steer (Standard) - Hydraulic flow rate 10 gpm @ 2000 psi - Handles up to (1.91 cm) aggregate - Empty weight- 985 lbs. (446.7 kg) - Gross weight with load- 3885 lbs. (1807.5 kg) - Overall dimensions (LXWXH) 92", 41.5", 49" Options: Remote Electric/Hydraulic Power Pack or Gas Engine/Hydraulic Power Pack 11.7 HP Honda Gas Engine - adds 450 lbs. of weight Crane lift bail for higher reach and better access (adds 2' of height and 90 lbs. of weight) Wireless Remote Control -
MST has long understood the hazardous involved with mixing cement and epoxy aggregate products and the airborne dusts that are part of the mixing process. MST has incorporated a vacuum system as an option for the solid top mixers to make sure that all airborne particulate does not reach the equipment operator. These tops and vacuum systems meet all OSHA requirements for the containment of silica containment. -
Developed with the assistance of professional fence builders, the Chain Link Fence Dispenser was designed to satisfy customer requests for a machine that picks up and dispenses cumbersome rolls of chain link fence easily, with no physical effort. Powered by the hydraulics used in the Skid-Steer Loader, the uniquely designed cage mechanism opens and tilts to retrieve the fence roll from the ground. For the fence contractor, this means no more unrolling fence by hand and using extra men to stand it up. Characteristics No heavy lifting for installing personnel Affordable and easy to use Dispenses and stretches fence For use with a skid-steer loader Attaches directly to skid-steer loader with a universal skid-steer attachment plate Up to 24" diameter roll capacity Removable center post to hold woven wire in center of cage Corrosion Sealed utilizing high quality powder coat paint Extension available for dispensing 10 to 12' fence, max. 16' Smoothly dispenses various fencing material, such as chain link, woven wire, vinyl coated fabric, snow fence and more "Tilt" full dispense swivel option for uneven terrain Optional Hog Hangers Specification Empty Weight - 1,465 lbs. (655 kg) Weight w/ 2' extension 1,665 lbs. (757 kg) Weight w/ 4' extension 1,890 lbs. (859 kg) Minimum hydraulic flow rate - 10 gal. @ 2000 psi Maximum hydraulic flow rate - 35 gal. @ 3000 psi Dimensions without extensions (DXWXH) 46 3/8"X78 3/8"X107" Optional 2' and 4' extension
-
Developed with the assistance of professional fence builders, the Fence unit was designed to satisfy customer requests for a machine that picks up and dispenses cumbersome rolls of chain link fence easily, with no physical effort. Powered by the hydraulic used in the Skid-Steer Loader, the uniquely designed cage mechanism opens and tilts to retrieve the fence roll from the ground. For the fence contractor, this means no more unrolling fence by hand and using extra men to stand it up. Characteristics - No heavy lifting for installing personnel - Affordable and easy to use - Dispenses and stretches fence - For use with a skid-steer loader - Attaches directly to skid-steer loader with a universal skid-steer attachment plate - Up to 24" diameter roll capacity - Removable center post to hold woven wire in center of cage - Corrosion Sealed utilizing high quality powder coat paint - Extension available for dispensing 10 to 12' fence, max. 16' - Smoothly dispenses various fencing material, such as chain link, woven wire, vinyl coated fabric, snow fence and more - "Tilt" full dispense swivel option for uneven terrain - Optional Hangers Specifications - Empty Weight - 530 lbs. (240 kg) - Minimum hydraulic flow rate - 10 gal. @ 2000 psi - Maximum hydraulic flow rate - 35 gal. @ 3000 psi - Dimensions without extensions (DXWXH) 33 1/4"X56"X56 3/4" - Holds up to 24" diameter roll - Capacity: 50' chain link, 330' woven wire - Attaches directly to mini skid-steer loader or walk behind
-
Developed with the assistance of professional fence builders, this unit was designed to satisfy customer requests for a machine that picks up and dispenses cumbersome rolls of chain link fence easily, with no physical effort. Powered by the hydraulics used in the Skid-Steer Loader, the uniquely designed cage mechanism opens and tilts to retrieve the fence roll from the ground. For the fence contractor, this means no more unrolling fence by hand and using extra men to stand it up. Characteristics No heavy lifting for installing personnel Affordable and easy to use Dispenses and stretches fence For use with a skid-steer loader Attaches directly to skid-steer loader with a universal skid-steer attachment plate Up to 24" diameter roll capacity Removable center post to hold woven wire in center of cage Corrosion Sealed utilizing high quality powder coat paint Extension available for dispensing 10 to 12' fence, max. 16' Smoothly dispenses various fencing material, such as chain link, woven wire, vinyl coated fabric, snow fence and more "Tilt" full dispense swivel option for uneven terrain Optional Hangers Specifications Empty Weight - 1,195 lbs. (543 kg) Weight w/ 2' extension 1,350 lbs. (614 kg) Weight w/ 4' extension 1,595 lbs. (702 kg) Minimum hydraulic flow rate - 10 gal. @ 2000 psi Maximum hydraulic flow rate - 35 gal. @ 3000 psi Dimensions without extensions (DXWXH) 33 3/8"X74 11/16"X106 15/16" Capacity: 50' chain link, 330' woven wire Optional 2' and 4' extension
