-
Low Viscosity Polyurethane For Fast Repair of Cracks and Spalls in Concrete Characteristics: - Open to traffic in 60 minutes (4,600 psi) - Available in numerous cartridge sizes and in bulk - Self Leveling, Ultra low viscosity penetrates cracks and wets substrate and aggregate - Can be used with concrete powder pigments for color matching - Low odor, 1:1 mix ratio hybrid polyurethane - Temperature range of application 30?F to 110?F (-1?C to 43?C) - 4,000 psi compressive strength in 1 hour (neat) - Viscosity less than 100 cP - 12 month shelf life Uses Include: -Quick repair of interior/exterior hairline cracks in concrete -Spall repair when mixed with aggregate -Industrial floor repair for hightraffic areas -Parking structures and concrete bridge repair -
Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks. Used to fill interior/exterior control joints or new construction saw joints on horizontal concrete surfaces. Characteristics: - Protects joint edges from spalling due to wheeled traffic - For exterior applications when minimal joint movement from thermal cycling will occur - Treated joints can be opened to traffic in 90 minutes at 75?F (24?C) - Wide application and service temperature range - Material Properties - VOC compliant formulations - Shore A hardness supports traffic - Self-leveling, low viscosity system - 18 month shelf life -
Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks. Used to fill interior/exterior control joints or new construction saw joints on horizontal concrete surfaces. Characteristics: - Protects joint edges from spalling due to wheeled traffic - For exterior applications when minimal joint movement from thermal cycling will occur - Treated joints can be opened to traffic in 90 minutes at 75?F (24?C) - Wide application and service temperature range - Material Properties - VOC compliant formulations - Shore A hardness supports traffic - Self-leveling, low viscosity system - 18 month shelf life -
Multi purpose, two component, moisture insensitive, epoxy repair paste, overhead and vertical repair, cartridge & bulk packaging, 1:1 ratio, application temperatures from 40 Deg. F to 110 Deg. F
-
Fast Curing Cold Weather Doweling Adhesive Characteristics Include: - 100% styrene free (no carcinogens), low VOC content - Adhering dowel bars and tie bars for full depth concrete repairs - Fast full cure time in cold temperatures, 3 hours @ 23 ?F (-5 ?C) - Wide service temperature from -40 ?F to 176 ?F (-40 ?C to 80 ?C) - Available in 10 oz. Unicartridge and 28 oz. Plural Component cartridges - Can be installed down to 15 ?F (-9 ?C) - Moisture insensitive - ASTM C881-14 Type II, Grade 3, Class A & B with exceptions - Non-sag consistency - 18 month shelf life -
High modulus, two component, Crack Injection Epoxy for concrete repair. Characteristics: - Inject into fine and medium crack (1/8" to 1/4") - Moisture tolerant - low viscosity (500cps) - self leveling - low surface tension allows for deep penetration into concrete cracks - plural component cartridge packaging or bulk units - ASTM C881 Type I, II, IV & V Grade 1, Class C; - AASHTO M235 -
A two-component, very low viscosity, Polyurethane hybrid formulation specially designed for quick repairs of hairline cracks and spalls in concrete substrate. CSR is a fast curing product to reduce downtime where return-to-service in needed. The CSR-LPL is a long potlife version of the CSR product. Use the CSR-LPL when aggregates are use to repair large spalls or deep holes in concrete floors. Characteristics: - Self leveling - Ultra low viscosity for deep penetration into craks resulting in a superior bond - High compressive strength (4,629 psi in one hour) - Easy 1:1 ratio mix - Available in 9 oz. Uni-cartridge or 22 oz. plural component cartridges or bulk packaging - Can be used with powder pigments for color matching - Application temperatures from 30 to 110 Def. F - Repaired cracks and spalls can be opened to traffic in less than 60 minutes - CSR-LPL long potlife facilitates adding aggregates for mortar repairs Uses Include: - Quick repair of interior and exterior hariline cracks -Quick repair of spalls when mixed with a specialty aggregate -industrial and commercial flood repairs for application with high volume traffic - Parking structure repairs - Concrete bridge repair -
High Modulus, two component, crack injection epoxy for concrete repair Characteristics: - Inject into to cracks from 1/4" to 3/8" wide - Moisture tolerant - Cures with virtually no shrinkage and bonds to most surfaces - Plural component cartridge packaging or bulk packaging - ASTM C881 Type I, II, IV & V Grade 1, Class C; - AASHTO M235
-
Multi-Purpose, rapid cure, epoxy bonding and repair product Characteristics: - Non Sag - High strength bonding agent for materials including concrete, brick, wood, stone and block - Non-sag patching material for cracks and small spalls, great for overhead and vertical repair - Can be used as an adhesive or filler - Cured surface can be sanded and painted - Rapid initial 3 hour cure at room temperature - Used as a capping paste for injection processes - Used as a port adhesive for crack injection process - Unicartridge packaging for easy installation with standard caulking gun(14:1 Recommended) - Moisture insensitive, can be used on damp surfaces and will cure underwater - Concrete gray color - 24 month shelf life - See MIRACLE BOND 1450 for bulk packaging -
Super Low Viscosity (195cps), 2-component epoxy adhesive perfect for gravity-feed repair of hairline to fine width horizontal cracks. It can be used in temperatures between 50?F - 100?F for a variety of repair projects including vertical crack repair using injection ports in conjunction with a capping paste. Its bonding and sealing capabilities for interior and exterior slabs are exceptional. It can also be used as an epoxy mortar for spall repair when mixed with aggregate. Characteristics: - moisture insenitive for use in damp enviroments - Super low viscosity (195cps) and low surface tension allows it to deeply penetrate hairline to fine cracks. - plural component cartidge or bulk unit packaging - 100% solids, solvent free system - zero VOC content - excellent for small concrete spall repair or large spall with aggregate extension -
High-Strength DOT Anchoring Epoxy Characteristics: - Long working time, 24 minutes @ 75?F (24?C) - Withstands freeze-thaw conditions - Multiple embedment depth design tables - Extensive coast to coast DOT approvals, including Caltrans - Low VOC, 2:1 mix ratio epoxy - Moisture insensitive allowing installation and curing in damp environments - ASTM C881-14 Type I, II, IV & V Grade 3, Class A, B & C - 28 month shelf life Uses Include: - Anchoring threaded rod, bolts and rebar dowels into concrete -short and long term tensile anchoiring, including wind, seismic, and shear forces in accordance with allowable stress design (ASD) - Grouting dowel bars and tie bars for full depth pavement repairs - Bonding agent for fresh to hardened concrete and hardened to hardened concrete -
High Strength Anchoring Epoxy with multiple DOT approvals Characteristics: little or no odor, high modulus, Withstands freeze-thaw conditions, Anchoring threaded rod, bolts and rebar dowels into concrete - Unicartridge / Plural component cartridge or Bulk papckaging available, Standard working time, 20 minutes @ 75?F (24?C) Wide in-service temperature range 35 Deg F to 180 Deg F, Low VOC, 1:1 mix ratio epoxy - Moisture insensitive allowing installation and curing in damp environments - ASTM C881-14 Type I, II, IV & V Grade 3, Class A, B & C - 28 month shelf life -
Two-Component, low-VOC (60 Grams/Ltr.), water-borne epoxy non-slip coating with a fine grit abbrasive. It is perfect for barefoot and recreational traffic areas such as pools, locker rooms, showers, pleasure boats, docks, laundries, walkways and decks. Its high rate of coverage makes it an economical choice. Characteristics: - is self-sealing - enhanced cleanability - chemical resistant - excellent for light industrial and institutional service areas - requires a priming system (PS 100 WB) Available Colors: White Tint Base & Neutral Tint Base
-
Two Component, Heavy Duty epoxy with Kevlar is formulated for maximum durability under heavy vehicular traffic. It?s resistant to fire, acid, alkali, solvent, grease, oil, salt water, detergent, alcohol, gasoline, hydraulic fluid, and weather. This makes it ideal for ramps, walkways, forklift traffic, loading docks, ships, stadiums, garages? wherever you need an extremely tough and tenacious anti-slip surface. Originall designed for flight deck operations of naval aircraft carriers where heavy impact resistance is required for repeated landing of aircraft. Characteristics: - high impact resistant - high chemical resistance to acids, alkalis, solvents, grease, oil, salt water, jet fuels, gasoline, detergents, and hydraulic fluids - simple to apply - apply's to metal, concrete, fiberglass, and wood substrates - requires a priming system (PS 100 WB) Available Colors: Gray and Black -
Two Component epoxy anti-slip coating, 100% Solids, Zero VOC, designed for the most demanding environments. AS-2500 provides superior resistance to chemicals and heavy traffic while providing safer footing and traction for rolling equipment. It is odorless and can be used in odor sensitive applications such as wineries, food processing facilities, hospitals and confined areas. Now available in a low temperature cure version for rapid return to service. The LTC hardener can be used at temperatures down to 35?F allowing for application in refrigerated areas or cold environments. Fire retardant in the cured state, AS-2500 resists fire, most acids, alkaline, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, and other hydraulic fluids. Characteristics: - 100% Solids - Zero VOC?s - odorless for sensitive application areas - high chemical resistance - Manufactured with Substainable Raw Materials - Available in Two Versions (Standard Cure & Low Temperature Fast Cure) - Custom colors are available with minimum order requirements - application on concrete, metal, fiberglass, or wood substrate - requires a primer system (PS 100 WR or MS7CZ or MS11CZLT Standard Colors: Gray, Black, and Safety Yellow. -
Two Component epoxy anti-slip coating, 100% Solids, Zero VOC, designed for the most demanding environments. AS-2500 provides superior resistance to chemicals and heavy traffic while providing safer footing and traction for rolling equipment. It is odorless and can be used in odor sensitive applications such as wineries, food processing facilities, hospitals and confined areas. Now available in a low temperature cure version for rapid return to service. The LTC hardener can be used at temperatures down to 35?F allowing for application in refrigerated areas or cold environments. Fire retardant in the cured state, AS-2500 resists fire, most acids, alkaline, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, and other hydraulic fluids. Characteristics: - 100% Solids - Zero VOC?s - odorless for sensitive application areas - high chemical resistance - Manufactured with Substainable Raw Materials - Available in Two Versions (Standard Cure & Low Temperature Fast Cure) - Custom colors are available with minimum order requirements - application on concrete, metal, fiberglass, or wood substrate - requires a primer system (PS 100 WR or MS7CZ or MS11CZLT Standard Colors: Gray, Black, and Safety Yellow.
-
Single Component, Epoxy Ester (HAPS Free) non-slip floor and deck coating designed for heavy pedestrian grade traffic Characteristics: - easy to apply - rapid curing - fire retardant in the cured state - partially used materials can be resealed for up to 24 month shelf life - resists gasoline, oil, acids, alkaline and aliphatic solvents - Colors Available: Gray, Black, Safety Yellow and Two Tint Bases Available Colors: Gray, Black, Safety Yellow, and Two Tint Bases (White & Neutral) -
Single Component, low VOC (32 Grams/Ltr.) elastomeric acrylic anti-slip compound for floor and deck coating application for pedestrian traffic Characteristics: - easy to apply - dries quickly - water based product - can be used right out of the can and resealed for future use - optimum adhesion to to asphalt, concrete, wood, and metal surfaces - Colors Available: Gray & Black and Two Tint Bases: White and Neutral -
Sure Patch is a 100% solids, low modulus, epoxy resin system containing specially selected aggregates. A unit consists of three parts: component ?A? epoxy resin, component ?B? modified amine curing agent and component ?C? specially graded aggregate. Use for interior or exterior concrete repair and overlays on interior horizontal surfaces. For interior industrial and commercial applications subjected to abrasion and or chemical spills. Characteristics: - 100% Solids, No VOC (g/L) - High chemical resistance - Trowelable - Rapid Strength Gain - Open to Foot Traffic in 2 Hours - Moisture Tolerant - Chemical Resistant - Complies with FAA Specification Item P-501-4.19 - Complies with ASTM C881 Type III, Grade 1 (Resin Only) - Gel time: 15 minutes @ 73?F (23?C) - Bond Strength (ASTM C-882):14 day cure 3,200 psi (22.6 MPa) - Compressive Modulus (ASTM D-695) 80,000 psi (551.6 MPa) - Tensile Strength (ASTM D-638): 3,000 psi (20.7MPa) - Tensile Elongation (ASTM D-638): 50.0% - Flexural Yield Strength (ASTM D-790) 2,500 psi (17.2 MPa) - Absorption (ASTM D-570): 0.2%
-
Sure Bond J58 is a 100% solids, two component, high modulus, medium viscosity, moisture tolerant structural epoxy adhesive that meets the requirements of ASTM C- 881 and AASHTO M-235. The primary use of the Sure Bond J58 is for bonding fresh concrete to hardened concrete. Sure Bond J58 has excellent adhesion to most construction materials. SureBond J58 may be used for anchoring bolts, dowels and reinforcing steel in concrete. Characteristics: - - High strength structural adhesive properties meeting ASTM C-881, AASHTO M-235, Types I, II, IV, V, Grade 2, Classes B & C (*with exception of gel time) - ideal for bonding fresh concrete to existing hardened concrete - secondary use for anchoring dowels, bolts, and reinforcing steel - Mix ratio: 1:1, part A to part B by volume - Color (mixed): Gray - Medium Viscosity Pumpable (ASTM 2393): 6200 cps - moisture tolerant - Gel time: 28 min. @ 73?F (23?C) - Shrinkage (ASTM D-2566): 0.0015
-
Sure Bond J58 LPL is a 100% solids, two component, high modulus, medium viscosity, moisture tolerant, long open time structural epoxy adhesive. Sure Bond J58 LPL primary use is for bonding fresh concrete to hardened concrete or steel. Sure Bond J58 LPL has excellent adhesion to most construction materials. Characteristics: - High strength structural adhesive properties meeting ASTM C-881, AASHTO M-235, Types I, II, IV, V, Grade 2, Classes B & C (*with exception of gel time) - ideal for bonding fresh concrete to existing hardened concrete - long working time for new concrete placement - Mix ratio: 2:1, part A to part B by volume - Color (mixed): Gray - Medium Viscosity Pumpable (ASTM 2393): 6200 cps - Moisture Tolerant - Gel time: 3.5 hours @ 73?F (23?C) - Shrinkage (ASTM C883): Passes - Thermal Compatibility (ASTM C-884): Passes
-
All Weather J51 AW is a two component 100% solid, moisture tolerant, all weather epoxy acrylate hybrid anchoring gel that meets the ASTM C881 specification requirements. All Weather J51 AW is formulated to set up at room temperatures and down to temperatures of -15?F (-26?C). All Weather J51 AW is ideal for anchoring dowels, bolts, threaded rod, pins and reinforcement steel in concrete. All Weather J51 AW can also be used in cooler and freezer applications or anywhere low temperature installations are required. Characteristics: - Meets USDA requirements for use in incidental food contact. - V.O.C. compliant, 100% Solids - Complies with ASTM C881 and AASHTO M235 - Types I, II, IV, V, classes A, B & C. Grade 3 (with exception of gel time) - Passed- ASTM E1512 (Sec.7.1 & 7.5) - Elevated temperature creep test - Mix Ratio (A to B by volume) - 10:1 - Gel time 60 GM MASS @ 73?F (23?C) - 7-8 Min - ASTM D695 - Compressive Strength - Greather than 10,000 PSI (68.95 MPa) - ASTM D695 - Compressive Modulus: 270,000 PSI (1861.6 MPa) - ASTM D570 - Water Absorption 0.06% - ASTM D648 ? Heat Deflection temp 140?F (60 C) - ASTM C882 ? Bond Strength - 2-days: 2,800 PSI (19.31 MPa) - 14-days 3,200 PSI (22.06 MPa) - ASTM D638 ? Elongation at break 1.3%
-
Architectural Finish is a single component, cement based material specially formulated for rubbing, smoothing, repairing and restoring vertical or overhead concrete surfaces. Architectural Finish is a trowel applied mortar designed to eliminate small concrete surface blemishes, rough areas, bug holes and form marks on poured walls, concrete tiltup and precast. The material dries to a light gray color and can be sanded to provide a smooth finish. The Architectural Finish develops a high strength that is compatible with underlying concrete and is not sensitive to water after curing. Applications are on vertical or overhead surfaces interior or exterior and above or below grade. Characteristics: - Fine silica aggregate provides smooth surface - Easy to use; just mix with water - Color blended to dry light gray - 30 minutes working Time - Interior or exterior applications - Can be left exposed, not sensitive to moisture. - Self-curing in 70? F (21? C), 50% relative humidity - TEST DATA @ 75? F (23.9?C) - Compressive Strength ASTM C-109 - 7 days: 4000 psi (27.5 MPa) - 28 days: 5000 psi (34.4 MPa)
-
Civil/Stryctural FPX is a single component, shrinkage compensated, portland cement based concrete repair material containing blended coarse aggregate. Civil/Structural FPX is enhanced with a corrosion inhibitor for rebar & steel protection and is designed primarily for large volume placements including structural elements, typically in applications from 1 inch (2.54 cm) to 12 inches (30.48 cm). For repair of concrete foundations and support columns utilizing form and pour or form and pump applications. Can be used on-grade, above, and below grade; horizontal, vertical and overhead; interior or exterior; structural and general repairs where 1 in. (2.54 cm) to 12 in. (30.48 cm) thicknesses are required. Excellent for use as a large repair material or resurfacing for parking facilities, industrial plants, bridges, tunnels, dams, balconies or any deep section repair of concrete. Characteristics: - Pre-extended with coarse aggregate for labor saving - Additional aggregate extensions available up to 20% - Corrosion inhibitor protects steel reinforcement from both chloride intrusion and carbonation - High bond strength - Compatible with coefficient of thermal expansion of concrete - Increased resistance to deicing salts - Excellent for deep section structural repairs - Freeze/Thaw resistant - Extended working time for ease of placement - Not a vapor barrier