-
Ceramic Repair Liquid is a unique ceramic filled, high build, brushable epoxy coating for severe errosion and wear areas of operating equipment and process systems. Formulated for unequaled chemical and corrosion resistance with outstanding wear properties under adverse enviroments. Characteristics: - can be mixed and appied with simple hand tools - high chemical and corrosion resistance - can be used as a lining materials for severe enviroments - commonly found in chemical plants, power planys, pulp & paper mills, mining operations, water treatment plants, other industrial and marine applications -
Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting severely errosion damaged areas of operating machinery and processing equipment exposed to corrosion, errosion, cavitation, chemicals, and acids. Characteristics: - can be mixed and applied with simple hand tools - can be used in temperature ranges up to 350?F - excellent for filling voids and rebuilding metal castings - Qualifies under Mil Spec DOD-C-24176B(SH) Type I II - Open Time: 25 Minutes - Gap Fill: from 1/16" (.0625") up to 3/4" (.075")
-
Fiberglass cloth is a woven material available in various sizes to allow for custom strengths, thicknesses, and wieght in projects. Our fiberglass cloth is a 6 oz. dual weave cloth that provides grat strength and durability when layered with our resin systems to form a hardened composite. This six once cloth is 3.9 mils thick. Characteristics: - available in 1", 3" and 6" wide rolls x 50 yards long - fiberglass cloth provides greater tensile strength than steel wire of the same diameter - excellent fire and heat resistance - thermal conductivity (making it useful for insuation applications) - excellent chemical resistance properties similar to hardened glass - durable and economical
-
PHILLYBOND #6 is a two component high strength epoxy paste used for the repair of punctures or cracks in tanks, pumps, pipes, steam lines, sea chests, valve bodies, etc., at temperatures up to 220?C (428?F). The material is also used to fill holes, voids and to provide a smooth surface for repairs with our PHILLYCLAD #8 and glass tape. PHILLYBOND #6 is resistant to most acids, alkalies and hydrocarbons and will adhere to clean surfaces such as steel, cast iron, bronze, aluminum, copper, nickel, wood and most plastics. Characteristics: - simple hand mixing process - can be mixed and applied with simple hand tools - resists high temperatures - resistant to most acids, alkalis, hydrocarbons, etc. - will adhere to various substrates such as steel, cast iron, bronze, aluminum, copper, nickel, wood, PVC pipe, and most plastics.
-
Phillyclad #8 is a two-component, fast setting epoxy laminating resin system for high strength fiberglass reinforced repairs to pipes, tanks, vessels, and other equipment that is subject to corrosion or errosion. This product is capable of high temperature applications (428 Deg. F) and can withstand pressures up to 1000 psi. Characteristics: - easily mixed and applied with simple hand tools - high pressure resistance (1000 psi hydrostatic in one hour) - high temperature resistance (428 Def. F) - rapid cure - resistant to salt water, fresh water, crude & refined oils, gasoline, jet fuels, caustics, and most acids Uses Include: -PVC pipe repair, cargo heating coils, steam pipes, turbine drains, electrical conduit for moisture sealing, tanks, valves, vessels, and other equipment subject to corrosion and errosion during the operating process.
-
PHILLYBOND #6 is a two component high strength epoxy paste used for the filling of severe erosion areas of pump case castings, filling of large cracks in tanks, pumps, pipes, steam lines, sea chests, valve bodies, etc., at temperatures up to 220?C (428?F). The material is also used to fill holes, voids and large offset in screw or welded pie fittings prior to the application of our PHILLYCLAD #8 and glass tape. PHILLYBOND #6 is resistant to most acids, alkalies and hydrocarbons and will adhere to clean surfaces such as steel, cast iron, bronze, aluminum, copper, nickel, wood and most plastics. Characteristics: - simple hand mixing process - can be mixed and applied with simple hand tools - resists high temperatures - resistant to most acids, alkalis, hydrocarbons, etc. - will adhere to various substrates such as steel, cast iron, bronze, aluminum, copper, nickel, wood, PVC pipe, and most plastics. - can be worked with water to provide a very smooth surface and offset transition
-
Phillybond Blue 6A (Repair Compound) is a two component epoxy paste developed specifically for filling, smoothing, and fairing applications on metals, fiberglass reinforced plastics (FRP), plastics, wood, concrete, and masonry. The smooth consistency and non-sagging properties make this product unexcelled in leveling rough or pitted palting, forming fillets and coves, smoothing weld seams, etc. This product has exceptional troweling and application characteristics that provide a smooth finished surface for the application of primer systems and finish top coats. Characteristics: - non-toxic - contains no solvents - non-sag - can be mixed and applied with simple hand tools - cleanup is with soap and water - can be faired to a feather edge - easily ground or sanded with air or electric hand tools - excellent chemical resistance to salt water, fresh water, crude and refined oils, gasoline, jet fuels, turbine oils, - resistant to most other chemicals found in an industrial, commercial, aerospace, or marine enviroment Uses Include: - pump casings (internal and external), impellers, sea chests, condensor boxes, heat exchangers, uneven hull and deck plating, thru hull fittings, cavatation damage, repair and sealing of riveted seams, automotive, aerospace, architectural, commercial, and marine applications.
-
Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting severely errosion damaged areas of operating machinery and processing equipment exposed to corrosion, errosion, cavitation, chemicals, and acids. Characteristics: - can be mixed and applied with simple hand tools - can be used in temperature ranges up to 350?F - excellent for filling voids and rebuilding metal castings - Qualifies under Mil Spec DOD-C-24176B(SH) Type I II - Open Time: 25 Minutes - Gap Fill: from 1/16" (.0625") up to 3/4" (.075")
-
PHILLYBOND TA-30 is a two component, high tack strength, epoxy adhesive specifically developed for the installation of vibration damping materials such as MLD-2 Tiles, RA, Saper, Isoper, PVC and other specialty design tile systems. Clamping or shoring is generally eliminated as TA-30 Adhesive will support in excess of 25 kg/sq.m. (5 lbs./sq.ft.) on overhead and vertical surfaces while curing takes place. TA-30 is excellent for grouting between damping tile sheets and for forming fillets at welds or seams. TA-30 is nontoxic and contains no solvents. Fumes and odors of mixed TA-30 are negligible thus facilitating usage in confined areas. Resistance to fresh water, salt water, crude and refined oils, gasoline, jet fuel, etc., is excellent. Characteristics: - 1:1 ratio mix - simple mxing and application process - non toxic - low odor - contains no solvents - will support 5 lbs/sq.ft. on overhead and vertical surfaces while curing - high resistance to salt water, fresh water, crude and refined oils, gasoline, jet fuels, etc.
-
Our ITW Titanium Repair Compound is the latest in high technology, high bond strength repair system. The Titanium Repair Compound formulation was created thru state-of-the-art computer modeling to provide the industry with fast, permanent repair to equipment that might otherwise require costly downtime. This resinsystem is the ideal solution to joining dissimilar metals such as iron, steel, aluminium, tungsten carbide, brass, zinc, and zinc alloys without the problems of galvanic corrosion. Characteritics: - adheres tenaciuosly to properly prepared surfaces - can be mixed and applied with simple hand tools - hardenes to a rigid metallic mass which permits drilling, tapping, and machining with ordinary metalworking tools - creates an intergral bond, maintaining a high level of resistance to impacy and abrasion - high resistance to chemicals -high service temperature resistance (250 Deg F.) - rapid cure
-
RezRok 105 is a highly workable epoxy patching compound used for a wide range of construction and structural repair applications such as bonding and patching where a paste consistency is required. - Anti-sag consistency at thicknesses to 1/4"; horizontal applications to 1/2" - Moisture insensitive - Excellent bond strength to concrete and steel Non-critical 1:1 mixing ratio`
-
RezRok 106 is a two component highly reactive polymeric adhesive formulated specifically for bonding applications as low 0? F. This unique formulation is used for construction and structural repair applications. - Ideal for applications where fast set is required - Contains no volatile solvents - Can be cured at extremely low temperatures and in damp conditions - Easy 1:1 mixing ratio - Good physical strengths and toughness - Low exotherm despite high reactivity - Excellent resistance to Non-critical 1:1 mixing ratio`
-
RezRok 150 is a versatile three-component polymer floor compound used for patching and topping concrete floors. It is packaged specially for convenience and ease of mixing. It cures quickly at ambient temperature for quick turnaround. - Fast setting for quick turnaround - Packaged for convenience, ease of use and easy clean-up - Excellent bond strength to concrete - Resists mechanical abuse and many chemicals - Contains no volatile solvents - Greater resiliency to concrete movement than cement-based products; won?t crack or shrink during cure - Can be applied in thicknesses from ?" to 12" - Ideal for plant maintenance, including small repairs Non-critical 1:1 mixing ratio`
-
RezRok 155 is a high performance epoxy grout used for supporting heavy machinery subjected to dynamic loading. This three component, 100% solids grout meets or exceeds most other epoxy and inorganic grouts in maintaining critical physical properties at elevated temperatures. - Outstanding dimensional stability - Maintains physical properties at elevated operating temperatures up to 180?F, a point at which many other grouts fail - Contains no volatile solvents - Fast curing property and high early strengths for shortened downtime and less cost - Resistant to most corrosive chemicals and oils - Excellent flowability without aggregate reduction
-
RezRok 157 is a multifunctional polymer grout formulated to provide maximum chemical resistance to 98% sulfuric acid and other aggressive chemicals. The grout combined blended filler and epoxy novolac resin with a special ?stress-relieving? additive to provide a durable and concrete compatible grouting material. - Withstands direct exposure to most inorganic acids (98% sulfuric acid, 100% phosphoric acid, 38% hydrochloric acid) and other aggressive caustics and solvents - Superior compatibility with concrete substrates - 100% solids, zero VOC formulation - Pourable consistency
-
RezRok 181 is a two component composite system for repairing and protecting substrates against course particulate abrasion and erosion. The system is based on toughened epoxy novolac resins and closely packed ceramic aggregates. - Excellent dry-heat abrasion resistance - Excellent impact resistance - Excellent chemical and corrosion resistance - Long working times - Cures down to 40?F
