Electric Motors Restoration & Repair

  • The 1107 Advantage Grout DOT is a non-shrink, noncorrosive, non-metallic cementitious grout that is designed to provide a controlled, positive expansion to ensure excellent bearing area (EBA). 1107 Advantage Grout DOT can be mixed from a dry pack to a fluid consistency. Uses include: interior and exterior grouting of structural column base plates, pump and machinery bases, anchoring bolts, dowels, bearing pads and keyway joints. Industries served: paper mills, petrochemical refineries, food plants, aerospace, water/wastewater treatment plants, gas transmission, power generation, etc. Characteristics Include: - Controlled, Net Positive Expansion - Non Shrink - Non Metallic/Non Corrosive - Dry Pack to Pourable Consistancy, Pumpable - InteriorEexterior applications
  • Five Star EZ-Cure Repair Mortar is a rapid-turnaround, fiber reinforced, cementitious, repair mortar for vertical and overhead structural repairs. It requires "No Wet Cure" or curing compounds and may be extended with course aggregate to make a fast setting concrete for deeper placements. Good for horizontal or formed vertical repair. Characteristics: - High early strength - No wet cure or curing compounds needed - Excellent freeze/thaw resistance -No Wet Cure or Curing Compounds -Course Aggregate Extension -Fiber Reinforced -Moisture Sensitive Coatings can be applied in 24 hours Uses Include: Horizontal Repairs, general repairs of concrete structures, steps and walkways, parking structures, formed vertical repairs
  • Five Star Fluid Grout 100 is the industry?s leading cement-based, nonmetallic, non-shrink fluid grout for supporting machinery and equipment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star Fluid Grout 100 exhibits positive expansion. Five Star Fluid Grout 100 meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07 and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40?F - 90?F (4?C - 32?C). Characteristics Include: - Air release technology per ACI 351.1 R - Placement within tight clearances down to 1/2 inch - High 1, 7 & 28-day strength - Permanent support for machinery requiring precision alignment - Does not contain gas generating additives, such as aluminum powder - Non-shrink from the time of placement - 95% Effective Bearing Area (EBA) is typically achieved following proper grouting procedures Uses Include: Grouting clearences to 1/2", Grouting of anchors and dowels, Grouting of Equioment and machinery to maintain porecise alignment, Non-Shrink grouting of structural steel and precast concrete, preplaced aggregate grouting, tank and vessel support.
  • Five Star Grout is the industry?s leading cement-based, nonmetallic, non-shrink grout for supporting machinery and equipment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star Grout exhibits positive expansion. Five Star Grout meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07, and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40?F - 90?F (4?C - 32?C). Characteristics Include: - Air release technology per ACI 351.1 R - 95% Effective Bearing Area (EBA) is typically achieved following proper grouting procedures - Provides placement versatility: dry-pack, pour, or pump - 45-minute working time - Permanent support for machinery requiring precision alignment - Does not contain gas generating additives, such as aluminum powder - Non-shrink from the time of placement Uses Include: Grouting of machinery and equipment to maintain precise alignment, Non-shrink grouting of structural steel and precast panels, grouting of anchors and dowels, support of tanks and vessels, etc.
  • Five Star High Strength Grout is the industry?s leading cement-based, non-metallic, non-shrink grout for supporting machinery and applications requiring precision alignment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star High Strength Grout exhibits positive expansion and meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07, and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40?F - 90?F (4?C - 32?C). Characteristics Include: - Ultra-high 1, 7, and 28 day compressive strengths - 95% Effective Bearing Area (EBA) is typically achieved following proper grouting procedures - Placement versatility: can be poured, wet set or dry packed - Permanent support for machinery requiring precision alignment - Nonshrink from the time of placement Uses Inlcude:Grouting of machinery and equipment under high loads, grouting of structural steel and precast concrete panels, support of tanks and vessels, wind trubines, compressors and turbine equipment, grouting of anchors and dowels, etc.
  • Five Star Epoxy Novolac Grout is a highly chemical resistant three component, 100% solids grout designed for industrial areas where exposures to acids and alkali's can occur. Five Star Epoxy Novolac Grout has excellent flowability, is moisture insensitive and is highly chemical resistant. Five Star Epoxy Novolac Grout meets ASTM-C 881 Type I, II, IV and V, Grade 2, Classes B and C. - High Chemical Resistance - Expansive, Non-Shrink - 95% Effective Bearing Area (EBA) - Superior Bond to concrete or steel - Meets ASTM C827 - Moisture insensitive - Low Exotherm - Excellent thermal shock, impact and wear resistance

Title