-
The 1107 Advantage Grout DOT is a non-shrink, noncorrosive, non-metallic cementitious grout that is designed to provide a controlled, positive expansion to ensure excellent bearing area (EBA). 1107 Advantage Grout DOT can be mixed from a dry pack to a fluid consistency. Uses include: interior and exterior grouting of structural column base plates, pump and machinery bases, anchoring bolts, dowels, bearing pads and keyway joints. Industries served: paper mills, petrochemical refineries, food plants, aerospace, water/wastewater treatment plants, gas transmission, power generation, etc. Characteristics Include: - Controlled, Net Positive Expansion - Non Shrink - Non Metallic/Non Corrosive - Dry Pack to Pourable Consistancy, Pumpable - InteriorEexterior applications -
Sure-Grip High Performance Grout is a non-shrink, non-corrosive, non-metallic cementitious grout designed to provide a controlled, positive expansion and to ensure excellent bearing area. Sure-Grip High Performance Grout can be mixed in a plastic or flowable consistency. Uses include: interior or exterior grouting of architectural and structural precast concrete components, structural column base plates, machinery bases, anchoring bolts, cable anchorages, dowels, bearing pads, keyway joints, crane rails or anywhere a high quality engineered grout is required. Industries served: paper mills, petrochemical refineries, food plants, aerospace, water/wastewater treatment plants, gas transmission, power generation, rail, transportation, infrastructure, etc. Characteristics Include: - High compressive strength quickly ? 5,000 psi in one day - Less downtime for machines/finish projects sooner - High ultimate compressive strength ? 10,000 psi in 28 days - Non-metallic/non corrosive - High density - Low water requirements - High fluidity/pourable/pumpable - Interior/exterior applications - Approved by numerous state DOTs - Tested and Certified by WQA to NSF/ANSI 61 -
Sure-Grip Precision Grout is a non-shrink, noncorrosive, non-metallic cementitious grout. Sure- Grip Precision Grout is designed to provide a controlled, positive expansion to ensure excellent bearing area and can be mixed from a stiff plastic to a fluid consistency. Sure-Grip Precision Grout does not utilize or produce gaseous expansion for height change characteristics. Uses include: grouting bearing plates and base plates, columns, beams and precast walls, equipment and pumps, shear keys etc. Industries served include paper mills, petrochemical refineries, food plants, aerospace, water/wastewater treatment plants, gas transmission, power generation, rail, transportation, infrastructure, etc. Characteristics Include: - Non-metallic, non-corrosive - Non-shrink - Multi-consistency, fluid, flowable or dry pack - Does not utilize or produce gaseous expansion -
Sure Patch is a 100% solids, low modulus, epoxy resin system containing specially selected aggregates. A unit consists of three parts: component ?A? epoxy resin, component ?B? modified amine curing agent and component ?C? specially graded aggregate. Use for interior or exterior concrete repair and overlays on interior horizontal surfaces. For interior industrial and commercial applications subjected to abrasion and or chemical spills. Characteristics: - 100% Solids, No VOC (g/L) - High chemical resistance - Trowelable - Rapid Strength Gain - Open to Foot Traffic in 2 Hours - Moisture Tolerant - Chemical Resistant - Complies with FAA Specification Item P-501-4.19 - Complies with ASTM C881 Type III, Grade 1 (Resin Only) - Gel time: 15 minutes @ 73?F (23?C) - Bond Strength (ASTM C-882):14 day cure 3,200 psi (22.6 MPa) - Compressive Modulus (ASTM D-695) 80,000 psi (551.6 MPa) - Tensile Strength (ASTM D-638): 3,000 psi (20.7MPa) - Tensile Elongation (ASTM D-638): 50.0% - Flexural Yield Strength (ASTM D-790) 2,500 psi (17.2 MPa) - Absorption (ASTM D-570): 0.2% -
Sure Bond J58 is a 100% solids, two component, high modulus, medium viscosity, moisture tolerant structural epoxy adhesive that meets the requirements of ASTM C- 881 and AASHTO M-235. The primary use of the Sure Bond J58 is for bonding fresh concrete to hardened concrete. Sure Bond J58 has excellent adhesion to most construction materials. SureBond J58 may be used for anchoring bolts, dowels and reinforcing steel in concrete. Characteristics: - - High strength structural adhesive properties meeting ASTM C-881, AASHTO M-235, Types I, II, IV, V, Grade 2, Classes B & C (*with exception of gel time) - ideal for bonding fresh concrete to existing hardened concrete - secondary use for anchoring dowels, bolts, and reinforcing steel - Mix ratio: 1:1, part A to part B by volume - Color (mixed): Gray - Medium Viscosity Pumpable (ASTM 2393): 6200 cps - moisture tolerant - Gel time: 28 min. @ 73?F (23?C) - Shrinkage (ASTM D-2566): 0.0015
-
Sure Bond J58 LPL is a 100% solids, two component, high modulus, medium viscosity, moisture tolerant, long open time structural epoxy adhesive. Sure Bond J58 LPL primary use is for bonding fresh concrete to hardened concrete or steel. Sure Bond J58 LPL has excellent adhesion to most construction materials. Characteristics: - High strength structural adhesive properties meeting ASTM C-881, AASHTO M-235, Types I, II, IV, V, Grade 2, Classes B & C (*with exception of gel time) - ideal for bonding fresh concrete to existing hardened concrete - long working time for new concrete placement - Mix ratio: 2:1, part A to part B by volume - Color (mixed): Gray - Medium Viscosity Pumpable (ASTM 2393): 6200 cps - Moisture Tolerant - Gel time: 3.5 hours @ 73?F (23?C) - Shrinkage (ASTM C883): Passes - Thermal Compatibility (ASTM C-884): Passes
-
A non-shrink cementitious grout designed to resist ?wash-out? in underwater or tidal zone grouting applications. Underwater Grout is a specific blend of portland cement, specially graded aggregates and admixtures to impart controlled expansion and exceptional cohesiveness for maximum flowability and strength. Uses include: underwater grouting for bridge columns, concrete pilings and dam repairs where a ?wash-out? resistant, free-flowing or pumpable nonshrink, high strength grout is required. Characteristics include: - ?Wash-out? resistant thixotropic consistency for dependable underwater repairs (displaces water) - Free-flowing and/or pumpable consistency for easy application - High early and ultimate strength for fast repair and turn around without chlorides - Positive expansion for maximum durability and adhesion
-
All Weather J51 AW is a two component 100% solid, moisture tolerant, all weather epoxy acrylate hybrid anchoring gel that meets the ASTM C881 specification requirements. All Weather J51 AW is formulated to set up at room temperatures and down to temperatures of -15?F (-26?C). All Weather J51 AW is ideal for anchoring dowels, bolts, threaded rod, pins and reinforcement steel in concrete. All Weather J51 AW can also be used in cooler and freezer applications or anywhere low temperature installations are required. Characteristics: - Meets USDA requirements for use in incidental food contact. - V.O.C. compliant, 100% Solids - Complies with ASTM C881 and AASHTO M235 - Types I, II, IV, V, classes A, B & C. Grade 3 (with exception of gel time) - Passed- ASTM E1512 (Sec.7.1 & 7.5) - Elevated temperature creep test - Mix Ratio (A to B by volume) - 10:1 - Gel time 60 GM MASS @ 73?F (23?C) - 7-8 Min - ASTM D695 - Compressive Strength - Greather than 10,000 PSI (68.95 MPa) - ASTM D695 - Compressive Modulus: 270,000 PSI (1861.6 MPa) - ASTM D570 - Water Absorption 0.06% - ASTM D648 ? Heat Deflection temp 140?F (60 C) - ASTM C882 ? Bond Strength - 2-days: 2,800 PSI (19.31 MPa) - 14-days 3,200 PSI (22.06 MPa) - ASTM D638 ? Elongation at break 1.3%
-
Architectural Finish is a single component, cement based material specially formulated for rubbing, smoothing, repairing and restoring vertical or overhead concrete surfaces. Architectural Finish is a trowel applied mortar designed to eliminate small concrete surface blemishes, rough areas, bug holes and form marks on poured walls, concrete tiltup and precast. The material dries to a light gray color and can be sanded to provide a smooth finish. The Architectural Finish develops a high strength that is compatible with underlying concrete and is not sensitive to water after curing. Applications are on vertical or overhead surfaces interior or exterior and above or below grade. Characteristics: - Fine silica aggregate provides smooth surface - Easy to use; just mix with water - Color blended to dry light gray - 30 minutes working Time - Interior or exterior applications - Can be left exposed, not sensitive to moisture. - Self-curing in 70? F (21? C), 50% relative humidity - TEST DATA @ 75? F (23.9?C) - Compressive Strength ASTM C-109 - 7 days: 4000 psi (27.5 MPa) - 28 days: 5000 psi (34.4 MPa)
-
Civil/Stryctural FPX is a single component, shrinkage compensated, portland cement based concrete repair material containing blended coarse aggregate. Civil/Structural FPX is enhanced with a corrosion inhibitor for rebar & steel protection and is designed primarily for large volume placements including structural elements, typically in applications from 1 inch (2.54 cm) to 12 inches (30.48 cm). For repair of concrete foundations and support columns utilizing form and pour or form and pump applications. Can be used on-grade, above, and below grade; horizontal, vertical and overhead; interior or exterior; structural and general repairs where 1 in. (2.54 cm) to 12 in. (30.48 cm) thicknesses are required. Excellent for use as a large repair material or resurfacing for parking facilities, industrial plants, bridges, tunnels, dams, balconies or any deep section repair of concrete. Characteristics: - Pre-extended with coarse aggregate for labor saving - Additional aggregate extensions available up to 20% - Corrosion inhibitor protects steel reinforcement from both chloride intrusion and carbonation - High bond strength - Compatible with coefficient of thermal expansion of concrete - Increased resistance to deicing salts - Excellent for deep section structural repairs - Freeze/Thaw resistant - Extended working time for ease of placement - Not a vapor barrier
-
Civil/Structural VO is a fiber reinforced, silica fume enhanced, cement based mortar designed for structural repairs of vertical or overhead concrete substrates. Civil/Structural VO is enhanced with a corrosion inhibitor for rebar & steel protection and is especially formulated for use in spray applied applications using wet spray process equipment. Civil/Structural VO has excellent finishing characteristics making it very user friendly to screed and finish. Due to its superb workability, Civil/Structural VO may also be applied by trowel or hand. For repairing of concrete above and below grade on both vertical and overhead applications. Typical applications include repair of columns, bridges, tunnels, parking structures, retaining walls, dams, etc. Characteristics: - One-component; just add water - Corrosion inhibitor protects steel reinforcement from both chloride intrusion and carbonation - Excellent resistance to freeze-thaw and de-icing salts - Designed for vertical and overhead applications without the need for forming - Interior and exterior applications - Shrinkage compensated - High bond strength - Thermal expansion similar to concrete for long term durability - Can be pumped and sprayed through small volume
-
HD 50 is a fast setting, fiber reinforced, latex-modified, heavy duty, one component concrete repair material requiring only water to mix and apply. HD 50 is a cement based compound having similar characteristics to normal portland cement mixes and is compatible with portland cement concrete. Excellent for heavy duty surfaces such as concrete highways, bridge decks, parking structures, airport runways, industrial and commercial warehouse floors, pier decks, loading docks and ramps, etc. Characteristics: - Can be opened to use or traffic within 60 minutes. - High compressive strength quickly ? over 2,000 psi in one hour. - Resists salt penetration and damage from freeze/thaw cycles. - Contains no chlorides or magnesium phosphate. - Meets ASTM C-928; Specification for Very Rapid Hardening Cementitious /Repair Materials. - Non Corrosive - Compatible with portland cement concrete. - Aggregate extension ? Up to 60% on repairs greater than 2 inches (5cm) deep. - can be coated with epoxy products in as little as 4 hours
-
Pave Patch 3000 is a horizontal repair mortar. It is a fast setting, heavy duty, one component concrete repair material requiring only water to mix and apply. Pave Patch 3000 is a cement based compound having similar characteristics to normal portland cement mixes and is compatible with portland cement concrete. Pave Patch 3000 is designed for the repair of heavy duty surfaces such as concrete highways, bridge decks, parking structures, airport runways, freezer rooms, industrial and warehouse floors, and loading docks. Pave Patch 3000 is a pourable material that may be poured into place for horizontal applications or into formed vertical and overhead applications. Chacacteristics: - Resists freeze-thaw cycles to extend the life of the patch - Is shrinkage compensated, helping to assure a tight contact with the surround concrete - Fast setting in 15-25 minutes; normal traffic in one to three hours - High compressive strength; up to 4500 psi (31 MPa) in 3 hours after setting - Ready-to-use, just add water - Meets ASTM C-928
-
Perma Patch FP is a specially designed patching and structural repair product for any maintenance and new construction projects where prolonged working time up to 40 minutes and fast strength in two to three hours is required. Can be used for all structural and general horizontal concrete repairs (interior, exterior, above and below grade) where sufficient working time during placement and high early strength is required. Characteristics: - Flowable/self consolidating - Up to 40 minutes working time - Ideal for horizontal or formed vertical/overhead applications
-
Perma Patch VO is a single component, cement based, patching and repair mortar developed for vertical and overhead applications. Perma Patch VO?s unique rapid setting, shrinkage compensating formulation offers excellent durability and ease of application without the use of forms. Perma Patch VO is specifically formulated to repair vertical and overhead concrete. Bridge columns, parking structures columns, spandrels beams, concrete ceilings, tunnels, pipes, pilings and any other vertical or overhead concrete repair application where excellent durability and strength is required. Characteristics: - Excellent resistance to freeze-thaw and de-icing salts - Designed for vertical and overhead patching - Interior and exterior applications - Rapid set and strength gain for multi-lift and structural repairs - Is shrinkage compensated, helping to assure a tight contact with surrounding substrate - High bond strength - Thermal expansion similar to concrete for long term durability - For overhead, vertical and horizontal applications
-
Perma Prime 3C is a three component, epoxy-modified cementitious bonding agent and corrosion inhibitor. Perma Prime 3C is non-flammable, water based and VOC compliant. Bonding agent for new to hardened concrete. Corrosion inhibitor for reinforcing steel. Bonding agent for cementitious or epoxy repair mortars. Characteristics: - True breathable bonding agent - Portioned kit contents for easy mixing - Long open time
-
Polyfast FS is a shrinkage compensated, high strength mortar containing portland cement, special polymers and additives to provide an outstanding strength gain along with a fast set. Polyfast FS is a single component trowelable material formulated for vertical, overhead and horizontal repairs. Polyfast FS is a polymer modified mortar that can be used for vertical, horizontal and overhead repairs of concrete structures for interior or exterior, above or below grade applications. It can be used as a structural repair for bridges, tunnels, parking structures, dams, walls, columns, etc. It is also excellent for the repair of precast concrete products, i.e., pipes, beams, steps and the like. Characteristics: - Ideal for vertical and overhead applications - Higher strength than typical concrete - ?Built-in? bonding agent/polymer modified - Very low chloride permeability - Fast setting - One component ? just add water - Excellent bond strength - Shrinkage compensating
-
Rapid Resin Repair is a high solids, low modulus, three component, all weather, non-shrinking epoxy/urethane hybrid concrete repair and patching material. Rapid Resin Repair utilizes high solids epoxy/urethane technology along with specialty graded aggregates for achieving rapid turn around concrete repairs in all weather conditions. Rapid Resin Repair is specifically formulated, designed and engineered for use as an all weather, interior/exterior concrete spall and crack patching and repair mortar where a rapid turn around time is critical or cold conditions are a concern. Rapid Resin Repair can be used for patching of bridge decks, overpasses and roadways surfaces, freezers and cold room floors, airport runways, warehouse floors and any concrete slab or floor traffic way in need of repair or patching where cold temperatures are present or rapid turn around time is required. Characterisitcs: - Non-shrink - Chemically resistant - Easy 1:1 mixing ratio for Parts A & B - Cures in temperatures as low as -20?F (-29?C) - Open to traffic within 20 minutes - Meets FDA and USDA requirements - Low odor
-
Novolac Epoxy offering a high degree of chemical and abrasion resistance to protect and seal concrete rafloors. Spec Cote 100 CR combines excellent chemical and wear resistance with a tough semi-gloss appearance for a seamless monolithic flooring surface. Spec Cote 100 CR can be used for concrete floors, chemical troughs, drains, tanks, spill areas, secondary containment, and other compatible materials for interior applications where harsh chemical splash and spillage routinely occur. Characteristics: - Excellent chemical resistance to a wide range of harsh chemicals - Excellent durability and adhesion to most substrates - High abrasion resistance - Tough impact resistant coating - V.O.C. compliant /low odor - High tensile & bond strength - High-build capabilities - Semi-gloss appearance
-
Special Patch is a polymer-modified, cementitious, twocomponent concrete repair mortar for use in thin and thick section concrete patching and overlays. Special Patch is ideal for repairing interior warehouse slabs or exterior concrete pavements. For all horizontal concrete and general repairs (interior and exterior, above and below grade). Ideal for parking deck repairs, ramps and roadways, as well as interior warehouse floors subjected to heavy loads and abrasion. Chacteristics: - Excellent abrasion resistance to heavy loads and traffic - High early strength for fast repair and turnaround - Versatile, easy to trowel consistency for horizontal applications - Does not form a vapor barrier for durable exterior repairs - Rapid-hardening mortar that accepts foot traffic in 1-2 hours - Pneumatic tire traffic in 4-6 hours
-
The Pro-Poxy? 2000 Deep Pour is a matched system of blended aggregates and pre-measured 100% solids epoxy, designed to provide a nonshrink, high-performance, epoxy machine grout for the support of heavy equipment. Applications ?" minimum (1.9 cm) to 18" (45.7 cm) can be accomplished with Pro-Poxy? 2000 Deep Pour. Placements greater than 18 inches (45.7 cm) can also be accomplished when properly extended with Pea gravel extender. Pro-Poxy? 2000 Deep Pour exhibits excellent flow and high bearing support when properly mixed and installed. Pro-Poxy? 2000 Deep Pour can be used for anchor bolts and sleeves, supporting pumps, mill tables, crushers, crane rails, engines, compressors, rotary equipment and other heavy machinery requiring a stable and energy absorbing base subject to dynamic loads to maintain precision alignment. Characteristics: - Excellent flowability - 1.5 Hours working time @ 75?F (24?C) - Very low exotherm allows for deep placements - High impact resistance - Superior creep resistance - Excellent chemical resistance - Tenacious adhesion to concrete and steel. - Low VOC (0 g/l) Compliant with all Federal EPA, OTC, LADCO, SCAQMD, and CARB regulations - Packaging Single Sack Kit (.5 Cu. Ft.Kit ) Coverage - 864 Cu.In - Full Unit (2.0 Cu.Ft. Kit) Coverage 3,456 Cu. - Available aggregate extension for large pour
-
The Pro-Poxy? 2000 Normal Set is a matched system of blended aggregates and pre-measured 100% solids epoxy, designed to provide a nonshrink, high-performance, epoxy machine grout for the support of heavy equipment. Pro-Pro-Poxy? 2000 Normal Set can be placed from ?? (1.9 cm) to 8 inches (20.3 cm) in a single pour. Applications ? (1.9 cm) to 18 inches (45.7 cm) can be accomplished with Pro-Poxy? 2000 Deep Pour. Pro-Poxy? 2000 Normal Set exhibits excellent flow and high bearing support when properly mixed and installed. Pro-Poxy? 2000 Normal Set can be used for anchor bolts and sleeves, supporting pumps, mill tables, crushers, crane rails, engines, compressors, rotary equipment and other heavy machinery requiring a stable and energy absorbing base subject to dynamic loads to maintain precision alignment. Characteristics: - High early strength - Excellent flowability - Good working time 1.5 hours @ 75?F (24?C) - Very low exotherm - High impact resistance - Superior creep resistance - Excellent chemical resistance - Tenacious adhesion to concrete and steel. - Low VOC (0 g/l) Compliant with all Federal EPA, OTC, LADCO, SCAQMD, and CARB regulations - Packaging Single Sack Kit (.5 Cu. Ft.Kit ) Coverage - 864 Cu.In - Full Unit (2.0 Cu.Ft. Kit) Coverage 3,456 Cu. - Available aggregate extension for large pour
-
Five Star Crane Rail Grout is a specially formulated grout for non-shrink, rapid strength gain for tight clearences and high dynamic loads. A three component, 100% solids, low VOC system designed to maintain presice elevations of installaed rail. Exhibits positive expansion per ASTM C827dampen high frequency sound and electrical isolation. This product is highly flowable, non-shrink, rapid strength gain, epoxy grout for tight clearance applications and dynamic loads. It is a three component, 100% solids epoxy system that exhibits positive expansion when tested in accordance with ASTM C 827 for 95% EBA (Effective Bearing Area). Five Star Crane Rail Grout has excellent chemical resistance. Charactesristics include: -High flow for tight clearances - Excellent adhesion to steel and concrete - 95% Effective Bearing Area -Positive Expansion, Non-Shrink - Chemically Resistant - Rapid strength gain for fast turnaround Uses include: Long Linear Crane Rail, Railroad Track Rehabilitation, Precision aloignment under dynamic and cyclic loads, installation in thin cross-sections, Transfer Car Runways, Material Handling Rail, Light Rail Applications
-
Pro-Flex is a 100% solids, two component, low shrink, moisture insensitive, joint filler and crack repair material. Pro-Flex is used to fill joints in industrial floors exposed to hard wheeled traffic. Pro-Flex is useful for contraction/construction joints that are cut or formed. Pro-Flex may also be used for the repair of damaged or spalled cracks. Characteristics: - Pourable consistency - Low V.O.C. (0 g/l) Compliant with all Federal EPA, OTC, SCAQMD, and CARB regulations - Viscosity (Self Leveling) - 1:1 mix ratio - Self-priming - Moisture insensitive - Allows moderate joint movement - Does not weld slab joints together - Does not embrittle with age - Meets U.S.D.A. requirements for incidential food contact