-
Modified epoxy formulation, outstanding corrosion resistance as a single coat, direct-to-metal (DTM) exterior coating -
Modified amine cured epoxy, formulated for corrosion resistance as a direct-to-metal (DTM) exterior coating of railcars
-
Rust Inhibitive epoxyprimer, excellent corrosion resistance, long term protection of exterior of railcars
-
Versatile, anti-corrosive coating used as a primer, intermediate coat, or self-priming topcoat over steel or zinc primers. Ideally suited for atmospheric exposures or topcoated with anit-foulants for immersion in fresh or salt water, used in marine and offshore industries above and below waterline
-
Cross-linked epoxy, surface tolerant, single coat, high gloss protection, excellent chemcial resistance (cycloaliphatic amine epoxy) LT version cures down to 35 Deg. F
-
A glass reinforced version of the 890 product, glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. LT version cures down to 35 Deg. F
-
A two-component of the 890 GF (glass fiber added at the factory and ready to use)
-
High chemical resistance epoxy with specialized applications in hyperbaric chambers for the U.S. Navy. Immersion grade formula for wtaer, sea water, and other exposures
-
Nuclear grade, DBA self-priming, epoxy, tested and certified for use in Nuclear Level 1 areas in a variety of systems
-
Low VOC version of the 890 product (VOC is less than 100 g/l)
-
High-solids, amine cured epoxy for direct metal-to-metal (DTM) exterior coating, exellent corrosion and chemcial resistance, fast dry to handle and cure proerties for shop applications
-
Ultra high solids epoxy designed as a liner for potable water, demineralized water, wastewater, and many other services, tank lining for steel and concrete tanks, (VOC is less than 100 g/l)
-
Polyethylene-enhanced, abrasion resistant, primer/finish, superior resistance to algae and other filimenticious growth. Used for process water, wastewater immersion, interior railcar hopper lining, coal bunkers, hydro bins, dust collectors
-
Cross-linked epoxy with zinc phosphate corrosion inhibitor,can be topcoated with itself or a variety of high performance finish coats. LH version is Low HAP'S
-
High-build cross-linked epoxy primer or intermediate coating, excellent corrosion protection, accepts a wide variety of top coats
-
Nuclear grade, DBA tested, epoxy primer, tested and certified for use in Nuclear Level 1 areas in a variety of systems
-
Versatile epoxy for diredt metal self-priming finish, excellent yellowing resistance, well suited for tank exteriors, variety of colors, very economical. LT version cure down to 35 Deg. F
-
Versatile corrosion resistant coating used for exterior weathering tank finishes, used of primer steel or can be used as a self-prime finish, moderate exposures, self-chaulking properties and maintains a white apperance as the coating weathers
-
High-performane epoxy, versatile, immersion-grade, VOC compliant, high build, self-priming. Suitable for marine and industrial environments, freash and salt water immersion
-
Modified epoxy flexible lining for use as an elastomeric coating for hopper cars
-
Modified epoxy formulated as a seal/barrier coat under the 896 High Chemical Service lining
-
High chemical service lining
-
Modified epoxy formulated for use as a protective lining with good resistance to acetic and hydrochloric acids
-
High solids, direct-to-metal (DTM) epoxy
