-
A two-component, 100% solids, high modulus, ultra low viscosity structural epoxy adhesive. Formulated for use as an injection or penetrating resin system for very fine to fine cracks (1/8" to 1/4" width) in concrete structures. Useable temperature ranges of 50 to 100 Deg. F. Cures to a solid with no shrinkage, and bonds to both surfaces of the crack, welding the structure back to its original monolithic strength. Characteristics: - Low odor for indoor applications - Self-leveling - Low viscosity (500 cps LR-321 & 200 cps LR-321LPL) - Low surface tension allows for deep penetration into cracks - Available in plural component cartridges or bulk packaging - Moisture insensitive for use in a damp enviroments -
A two-component, 100% solids, high modulus, very low viscosity resin system for gravity feed or injection of fine to very fine cracks in horizontal concrete substarate. Product can be injected on vertical and overhead application with proper injection techniques. It is a moisture insensitive material and can be used in a damp envionment. Product can be used in temperatures from 50 to 100 Deg. F. Characteristics: - Very low vicosity (195 cps) - Moisture insensitive for use in damp environments - low surface tension allows for deep penetration into very fine cracks - Non-shrink and bonds to all surface of the crack - Available in plural component cartridges or bulk packaging Uses Include: - Pressure injection into very fine cracks or voids under machinery baseplates - Gravity feed of fine cracks or voids in structural concrete, masonry, wood, or machinery baseplates - Epoxy resin binder for mortar repair, patching, and overlays of interior surfaces - A sealer for interior and exterior, above-ground slabs, decks, patios, driveways, parking garages, and other concrete structures -shear fracture repairs of interior and exterior concrete slabs
-
A unique flexible port used for the injection of our cartridge resin systems on various substrates. This port includes a one way check valve to purge air during the injection process but closes when the resin system hits the valve. The bladder is designed to expand with the flow of resin product to maintain a positive pressure into the void area. Simple to distinguish the port that requires additional resins to complete the injection process. Will not over-pressure a void area to create baseplate distortion.
-
Machine Suppport Technologies represents a number of pump manufacturers for the application of our resin systems. We also represent various manufacturers for the pumping of cement grout, epoxy grout, and floor overlays and underlayments. Each pump is designed for a specific application. They include: - Resin Injection - IP2C Gel Injection Pump - IP-GT1C-SS Polyurethane and Epoxy Pump - IPGT2C GeoTech Injection Pump - IP-GT3C-SS GeoTech Injection Pump - JointMaster Pro2 G3i Digital f2002 Injection Pump for Crack and Joint Fill - PA 3000 Epoxy Injection Pump -P 3003-2C Polyurethane & Epoxy Pump - IP495 Injection Pump Controlable Discharge Pressure, and the HP100 Hand Pump
-
A rigid port used for the injection of our resin cartridge systems on various substrates. This port will accept direct injection of our resin cartridge systems via a black & blue quick connect for multiple ports or direct connection of the static mixer when using a cartridge system.
-
Crack Repair SLV is a very low viscosity, two-component hybrid polyurethane specifically engineered for use as an easy to apply, rapid curing concrete repair material. Its low viscosity offers deep penetration into hairline cracks for concrete structural repairs and the addition of a specialty aggregate allows for very fast turnaround large spalls, fractured joint repairs, or holes left by previous mechanical anchor systems. Characteristics: - Very low viscosity (60 cps) - Can be used in temperatures from 0 to 115 Deg. F - Self-leveling - Solvent free - No V.O.C. - Rapid set, fast turn-around - Packaged as a plural component cartridge for easy installation Uses Include: - Industrial and commercial floor repair - Spall repair when used with a specialty aggregate - Fill very fine cracks in concrete substrate - Interior and experior applications with minimal UV color change - Rebonds concrete surface to makes a continuous surface for weight loading
-
HP Anchor Gel is a 100% solids, all weather, solvent-free, structural epoxy acrylate anchoring adhesive. Using the latest technology, Five Star HP Anchor Gel, has been engineered to be applied at temperatures below 0 (-15?F [?26? C]) , set up quickly in damp and/or water-filled holes and attain excellent bond strength to smooth diamond core drilled holes. Characteristics: - Meets the performance requirements of ASTM-C-881, Types I, II*, IV & V*, - Classes A, B & C, Grade 3 (*with exception of gel time). - Moisture intolerant, Sets up in water-filled holes - Bonds to smooth diamond core drilled holes - Cold weather installation down to -15?F (-26?C) - Styrene free formulation - Underwater anchoring adhesive - Packaged in plural component cartridge for easy application
-
A two-component, 100% solids, moisture insensitive, structural epoxy adhesive used to fill cracks up to 1/4" in width. The LV adhesive is a very low viscority epoxy system that can be gravity fed or pressure injected into cracks and voids. The LV adhesive can also be used as a buinder for making an epoxy patching mortar using an aggregate extension. Characteristics: - Low viscosity for deep penetration into cracks or voids - Moisture insensitive for use in damp enviroments - High modulus structural adhesive - High strength properties - Excellent adhesion to concrete, masonry, wood, steel, and most structural materials - Meets USDA specifications for use in food processing areas - Low odor - Meets ASTM C881 Types I, II, IV, and V, Grade 1 Class B & C Uses Include: - Gravity feed of large cracks in horizontal concrete and masonry - Pressure injection of cracks in structural concrete, masonry, wood, and other substrates up to 1/4" wide - Pressure injection of vertical and overhead cracks with proper application techniques - Sealing tunnels, cable vaults, tanks, and basements - Seal interior slabs and exterior above grade slabs from water and chlorides - Binder for an epoxy patching mortar of interior horozontal surfaces
-
A two-component, multi purpose, moisture insensitive, structural adhesive used for filling cracks on concrete and masonry up to 1/2" in width. The PolyFlex Gel is a smooth, non-abrasive that can be hand appied or pressure injected. It is formulated to react with water water to form a hydrophilic polyurethane foam that molds to substrate and stabilizes surronding soil. It will continue to cure with water and swell into a rubber-like polyurethane foam. Characteristics: - VOC compiant - Excellent adhesion to masonry, concrete, wood, steel, and most structural materials - High strength properties - Convenient 1:1 mixing ratio - Moisture insensitive - Unique non-abrasive texture permits applications with automatic dispensing equipment for pressure injection Uses Include: - Sealing jacket seams - Pressure adhesion of masonry, concrete, wood ans other substrates - Surface repair of non-moving cracks on new or existing structures - Anchoring of bolts, dowels, pins, and specialty fasteners - General purpose gel adhesive - Re-pointing concretye block and timbers for drydock applications
-
A single component, 100% solids, flexible, low viscosity, injection resin for water stopage in concrete, masonry, and sandy soil structures even when strong seepages or gushing leaks are entountered. Its reaction with water results in the formation of a flexible polyurethane which forms a hydrophobic and chemically-resistant barrier. Characteristics: - Rapid water tight seal formation - Forms a hydrphobic and chemically resistant barrier - Remains flexible without further shrinking or swelling - 100% solids - Adapatable reaction time with the use of an accelerator - React s with water - Low viscosity Uses Include: - Concrete and masonry retaining walls - Sea-walls of various substrate - Box culverts - Tunnels - Pipe penetrations in concrete, masonry, and soil substrates - Concrete tanks - Concrete clarifiers
-
This product is designed to help accelerate the reation time and expansion rate of the of the PolyWatercut product. Characteristics: - 1% Addition (1.5 oz. to 1 Gallon) = 90 second initial reaction time = 5 min. 30 sec set time = 13.5 times expansion - 10% Addition (13 oz. to 1 Gallon) = 12 second initial reaction time = 30 second set time = 29 times expansion
-
A single component, solvent free, very low viscosity, hydrophobic polyurethane water cut-off grout. . This product is specifically engineered for use in concrete, water bearing structures, or sandy environments to stop gushing water or water seepage including cracks in concrete where the structure is not subject to movement. It is formulated to react with water to form a rigid polyurethane closed cell foam that molds to substrate and stabilize surrounding soils to help its load bearingcapabilities. Characteristics: - Very low viscosity (110 - 130 cps) - Rapid compressive strength gains - Resistant to biological attack - Pumped as a single component - Reacts with water to form a close-cell watertight foam - Up to 2900% expansion - Variable reaction (set) time with the use of an accelerator - Capable of closing gushing leaks to watertight Uses Include: - Sealing leaks and filling wide gaps in concrete such as box culverts - Sealing tunnels (subway, water, utility, etc.) - Seals manholes, sanitary and storm pipe structures - Curtain grouting below grade structures in parking decks, foundations, and basements - Permeation grouting for soil stabilization in roads, highways, seawalls, and retaining walls
-
A rapid setting, two component, 100% solids structural epoxy for anchoring rods, bars and bolts in concrete, as well as filling cracks and setting ports for epoxy injection. Five Star RS Anchor Gel is a nonsag, moisture insensitive epoxy adhesive that can be used for both vertical and horizontal installations. This system offers chemical resistance, excellent adhesion and rapid strength gain. Characteristics: - Low VOC - Low odor - Moisture insensitive, can be used in wet environments - Excellent adhesion to masonry, concrete, wood, steel and most structural materials - Gel consistency ideal for vertical, overhead and non-mating surfaces - Fast strength gain - Convenient 1:1 mixing ratio - Convenient cartridge and bulk packaging - Meets ASTM C881 Types I, II, IV, and V, Grade 3, Classes B & C standards
-
A two component, 100% solids, moisture insensitive, structural epoxy used in filling cracks up to 1/2" wide. It is a smooth, nonabrasive gel that can be pressure injected or hand applied above grade or underwater. Characteristics: - Low VOC - Excellent adhesion to concrete, masonry, wood, steel, and most structural substrates - High strength - Gel consistancy for vertical and overhead applications - Moisture insenitive - Convenient 1:1 ratio mix design - Unique nonabrasive texture permits applications with automated dispensing equipment - Packaged as a plural component cartridge (22oz.-600ml) or bulk units (2 gallon pails) Uses Include: - Sealing PileForm F Fiberglass jacket seams - Pressure injection of cracks in structural concrete, masonry, wood, and othe substrates - Surface repair of non-moving cracks on new or existing structures - Anchoring of bolts, dowels, pins, and special fasteners - General purpose adhesive - Re-pointing concrete block and timber drydocks
-
MST has a series of epoxy compounds that are used to fill very large voids in machinery baseplates, pumpbases, and any other type of void area. This includes products such as Chockfast Gray, Chockfast Red HF, Five Star DP/PG, Five Star Fuid Epoxy, etc. Give us a call with your application and we'll make a recommendation of product for your application.
-
This one piece port fits in a 1/2" diameter drilled hole in a concrete surface. It is used when the surface is to irregular for the use of our standard surface port or the surface of the concrete is to contaminated and allows the resins to penetrate into cracked structure below the contaminated surface area. It will accept resins from either a two component pump system or our cartridge systems using a static mixer and a quik-connect fitting.
-
This one piece port fits in a 1/2" diameter drilled hole in a concrete surface. It is used when the surface is to irregular for the use of our standard surface port or the surface of the concrete is to contaminated and allows the resins to penetrate into cracked structure below the contaminated surface area. It will accept resins from either a two component pump system or our cartridge systems using a static mixer and a quik-connect fitting. -
This one piece port is designed to inject our resin systems into a corner application. It will accept resins from either a two component pump system or our cartridge systems using a static kixer and a quik-connect fitting. This port works well for cracks and seperations between abutting elements such as walls and floors, or steel plates and concrete.
-
This two piece port uses a port porting adapter (LPP) and and a polyethylene tee (LPT). The pedestal is bonded to the surface using a two component adhesive. The barbed tee fits over the pedestal inlet tube and allows for multiple injection ports via manifolding with one fill spot. Once the void is full the black tee (LPT) is pushed down to seal the port and prevent drainage during the resin cure process.
-
This one piece port is designed to inject our resin systems into any surface application. It will accept resins from either a two component pump system or our cartridge systems using a static mixer and a quik-connect fitting. This port will withstand pressures up to 900 psi. A perforated base allows it to be positioned easily over a crack or drilled hole. This port works well for vertical, horizontal, or overhead applications such as flat wall surfaces, floors, baseplates, soleplates, or any other injection process where accessability is good. It will accept resins from either a two component pump system or our cartridge systems using a quik-connect fitting.
-
MST has a series of manual injection guns to cover any application of our resin systems. From a standard caulking gun (1:1 ratio) for very low viscosity resins up to (26:1) ratios for high viscosity resins, joint fillers and mastics. Our (14:1 ratio) gun is excellent for our uni-cartridge resin systems. We also have a series of plural component guns for our dual cartridge resin systems and bulk guns for large volume product applications. Each gun is designed and manufactured to an ergonomic design for continued use without operator fatigue.
-
A manual plural component caulking gun with a 26:1 thrust ration for ergonomic user application comfort. Can utilize the following plural component sizes: 300ml x 300ml, 300ml x 150ml, 150ml x 150ml, 150ml x 75ml Easily converts to various cartridge sizes with snap-in, snap-out push discs.
-
A manual plural component caulking gun with a 26:1 thrust ration for ergonomic user application comfort. Designed specifically for 750ml x 75ml plural component cartridges
-
A standard manual caulking gun for 10 oz. or 30 oz. cartridges with a 12:1 piston ratio for ergonomic applicator comfort.
