-
High-build, vinyl ester coating specially formulated for excellent abrasion resistant -
Vinyl ester resin combined with glass and other pigments to provide a coating with excellent chemical resistance
-
Vinyl ester resin combined with inert flake filleers, exceptional chemcial resistance to a wide range of chemicals including acids and food products, dry temperature resistance to 380 Deg.f continous, recommended for stacks and absorbers, ductwork in flkue gas desulfulization units, meets FDA rquirements for direct food contact
-
High abrasion version of the 4100 product, NSF rated for cold potable water, meets FDA requirements for direct food contact, includes services such as carbon filters, process and storage vessels, bag houses, stacks, absorbers, and ductwork for flue gas desulfurization, dry temperature resistane to 380 Deg. F continous
-
Vinyl ester resin combined with special curing system and inert electrically conductive pigments that provide outstanding chemcial and physical properties
-
Vinyl ester coating combined with inert flakes fillers, excellent resistance to a wide range of chemicals including acids and solvents, recommended as a tank liner for process and storage tanks, bag houses, stacks, absorbers, duct work in flue gas desulfurization, dry temperature resistant to 380 Deg. F continous
-
Novolac epoxy vinyl ester, glass-flake filled coating, outstanding resistance to a wide variety of chemicals including organic and inorganic acids, kost alaklies, and many solvents
-
Novolac epoxy vinyl ester, inert glass-flake filled coating, outstanding resistance to a wide variety of chemicals including organic and inorganic acids, kost alaklies, and many solvents
-
Highly abrasion resistant version of the 4300 product
-
Flake-filled epoxy applied by plural component spray equipment up to 40 mils in a single coat, broad range of chemical resistance, low temperaure cure down to 35 Deg. F, extremely tough coating
-
Fast cure,solvent free, edge retentive, high performance epoxy lining, ideal for petroleum cargoes where quick turn-around and return to service (less than 24 hours), can cure down to 20 Deg. F
-
Flake-filled preimum epoxy similar in performance to Plasite, applicator friendly, applied with standard spray equipment, short but workable potlife
-
Solvent-free, highly wetting (penetrating), high performance epoxy, used as a pit-filler and blast hold primer for internal tanks linings for chemical or other commodity storage, suited for both new steel and tank relines where severe pitted steel bottoms are common
-
Flake-filled, premium epoxy novolac, applied by plural component equipment up to 40 Mils per coat, application temperatures down to 35 Deg. F, extremely tough coating
-
Flake-filled, premium epoxy novolac, similar to the 4550 product, applied by standard spray equipment up to 40 Mils per coat, application temperatures down to 35 Deg. F, extremely tough coating, short but workable potlife
-
Flake-filled, premium epoxy novolac similar in performance to Plasite S, FDA compliant for food grade exposures, applies using standard spray equipment, short pot-life but workable
-
Trowelable epoxy monolithic liner applied at a thickness of 1/8", excellent abrasion resistance, chemical resistance, high compressive strengths, excellent impact resistance. Recommended for concrete tanks, threnched, sumps, stell storage, process tanks in highly corrosive services
-
Trowelable epoxy monolithic liner applied at a thickness of 1/8", excellent abrasion resistance, chemical resistance, high compressive strengths, excellent impact resistance. Recommended for pump casings, conveyor skirts, hoppers, chute lining, pipe elbows, slurry line elbows, cobbler repulp water circulators, feed chutes, pan feeders
-
Solvent free, aggregate-filled, epoxy high-strength monolithic liner, optimum chemical resistance to chemical exposures found in wastewater treatment areas such as manholes and lift stations, trowel applied, single coat to 1/8", cure to water and chemical resistant in 24 hours at 70 Deg. F
-
Cross-linked epoxy phenolic formulated for a wide range of chemical resistance
-
High abrasion resistant version of the Plasite 7122 product
-
Cross linked epoxy-phenolic tank lining for industrial maintenance where release properties are required to reduce or avoid product sticking, hangup, bridging problems in storage tanks, hoppers, or bins
-
Cross linked epoxy-phenolic cured lining, formulated for a wide variety of chemical resistance, applicator friendly, lower VOC than the Plasite 7122 HAR
-
Cross linked epoxy-phenolic formulated with a particular attention to a wide range of chemicals, user friendly, complies with FDA 21 CFR 175.300 criteria for food contact, lower VOC than Plasite 7122
