-
Epoxy novolac formulation, flake filled, with outstanding resistance to chlorinated solvents and high acid exposures, excellent thermal shock resistance -
Epoxy (300) and epoxy-novolav (305) polymer concretes for extreme concrete exposures to rebuild/restore concrete pads, equipment pads, etc.
-
Fast set, epoxy grout, designed for filling holes, ruts, and erosions in concrete, change level or pitch in preparation for a carboline epoxy lining system
-
Vinyl ester laminated monolithic floor topping system, produces high density, easily cleaned, non-skid surface
-
Two-component, self-leveling, polyurethane sealant, excellent flexibility with moderate hardness, good chemical resistance to organis acids, alkalis, and most solvents
-
Bodied-up version of the 800 primer, used as a patching mortar
-
Vinyl ester primer used to seal concrete for vinyl ester and polyester systems
-
Flexible epoxy-novolac, selas joints and cracks, 100% elongation
-
Rubberized epoxy, used for light duty (foot Traffic), moderate chemical resistance, use as a joint sealant to bridge cracks
-
Rubberized vinyl-ester primer, provides high adhesion, impact resistance of vinyl-ester topcoats over concrete surfaces
-
High-performance, semi-leveling vinyl ester, used for aggressive chemical exposure for process floors and secondary containment. (CT) Cold temperature curing formulas avilable
-
Non-Shrink, vinyl-ester concrete, can be topcoated in 8 hours, used to replace acid brick at 1" thick and rebuild equipment foundations in aggressive chemical exposures
-
Non-woven geotextile made from polypropylene fibers, chemically and biologically inert and offer good chemical resistance to acids, alkalis, oils, and most solvents, when saturated with Semstone 805 or 806 result is a chemically resistant, flexible, reinforced membrane for sealing expansion joints or bridging cracks working in concrete
-
Woven, Type "E" borosilicate glass fiber reinforcing fabric, bio-directional strength, used with Semstone epoxy, novolav, or vinyl-ester coatings/linings, impact resistant, high tensile strength, and fatigue resistance of the system is increased
-
Crushed Newsprint for adding body to Semstone products -
Cabosil for film building properties for Semstone products
-
Insulating coating designed to provide cryogenic protection of structural steel, vessels, piping, and duct work, operating temperatures from -40 Deg. F to 175 Deg. F
-
Ceramic blend insulative composite coating for high temperature resistant acrylic binder, protective barrier to shield personnel from hot surfaces
-
High-temperature resistant epoxy binder, ideal for protective heat barrier to shield personnel from hot surfaces and keeps structures exposed to solar raditation significantly cooler,used to minimize condensation of pipes or other operating equipment, high film build, quick turn-around to service
-
Insulating coating designed to provide cryogenic protection of structural steel, vessels, piping, and duct work, operating temperatures from -40 Deg. F to 302 Deg. F
-
Tough, resilient, glass syntactic polyurethan elastomer designed for thermal insulation to subsea oil wells, pipelines, and associated subsea equipment environments, suitable for use on hot pie up to 165 Deg. F and under extreme pressure up to 4000 psi in depths up to 9000 feet at seawtaer temperatures at 34 Deg. F., ideal where a flexible, non-cracking thermal insulation is preffered to provide flow assurance
-
Waterborne acrylic primermused to promote adhesion over galvanized and other non-ferrous metal substrates, unique formula, very lox VOC, accepts two-component, solvent containing finishes like epoxys and urethanes
-
Non-chloride admixture for cement that accelerates hydration, reduced setting times, allows for rapid topcoating of some products within 24 hours
-
Vinyl ester resin combined with pigments to provide a high build coating with excellent chemical resistance
