-
Epoxy Polyamide, outstanding water resistance in immersion, High Film Build (2 Coats), excellent Chemical Resistance (Splash & Spillage) Low HAP'S Version available (300LH) -
High Build, Coal Tar Epoxy, for protection of steel and concrete in a single or two-coat application, specifically developed for the Corps of Engineers
-
High Build, Thixatropic Mastic, Direct Metal-to-Metal contact, Bureau of Reclamation Spec CA50, for underground tanks, piping, etc.
-
Nulcear grade, penetrating primer/sealer for concrete substrates, DBA tested and certified for use in Nuclear Level 1 areas in a variety of systems with appropiate finish coats
-
Cross-linked epoxy with special reinforcing fillers, severe impact and abrasion resistance, excellent for spalsh zones
-
Glass-flake filled epoxy, extremely tough and abrasion resistant coating, excellent skid resistance
-
Solvent free cross-linked epoxy is used asa a universal primer with excellent adhesion, primer/sealer for concrete, pyrocrete, and masonry surfaces
-
Waterborne epoxy primer, primer/sealer for concrete substrates, promotes adhesion of various topcoats including polyurea/polyurethane elastomers, can be used on dry or damp concrete
-
High Build, Modified Epoxy "Chaulk", good overall chemical resistance and versatility, tank lining applications for transition areas, floors, walls, lap welds, pitted steel, bolts, etc. Ideal for relining or reconditioning older tanks
-
High solids, epoxy surfacer, excellent adhesion to concrete, can be spray applied, squeege, or trowel. Used on concrete or masonry block, provides suitable substrate for application of recommended topcoats in a continous film, free of pinholes and holidays. Not recommended for applciations on wet substrates or at temperautre below 50 Deg. F
-
Modified Phenalkamine, surface toleerant, epoxy specially formulated for Marine or Industrial environments. Suitable for fresh and salt water immersion resistance, good for temperautre down to 0 Deg. F, applicator friendly.
-
Solvent Free Epoxy Patching Compound, concrete and masonry
-
Waterborne Epoxy Patching Compound, concrete and masonry, damaged cocnrete, fills large cracks, wall floor transition coving, sloping material for floor transitions
-
Spray Grade version of the 510 product, deteriorated concrete in the Waterwater environment, provides protection from H2S attack or MIC
-
Waterborne Epoxy Primer, good chemical resistance, better film hardeness as compared to straight acrylic or acrylic-epoxy systems
-
Solvent free, plural component spray applied, commonly used in tank lining applications
-
High Solids, Versatile, Corrosion Resistant Coating,used as a primer, imtermediate coat, or self priming finish over steel or inorganic zinc primers
-
High Solids, Versatile, Corrosion Resistant Coating,used as a primer, imtermediate coat, or self priming finish over steel or inorganic zinc primers (Low HAP's and Silica Free)
-
Specially formulated, High Solids, Versatile corrosion Resistant coating designed as a weathering finish for exterior use. It will freely chaulk on UV exposure to maintain a white appearance over its useful life.
-
High Solids, Corrosion Resistant coating for potable water lining of tanks and pipelines, good adhesion propeerties
-
Versatile Epoxy-phenalkamine for low temperature cure capabilities, quick recoat time, 6 month recoat window for atmospheric use, can be used in immersion service
-
High Abrasion version of the 635 coating. Versatile Epoxy-phenalkamine for low temperature cure capabilities, quick recoat time, 6 month recoat window for atmospheric use, can be used in immersion service, outstanding moisture tolerance during application, very fast cure
-
All purpose innersion grade epoxy, same propertiers as the 635 coating, low tempereature cure, surface tolerance, fast recoat, moisture tolerant, Low VOC and Low HAP's, available in custom colors
-
Epoxy-Phenalkamine is a self priming finish, excellent corrosion protection, moisture tolerant both during and after application, cure down to 20 Deg. F, available in custom colors
