-
The 1107 Advantage Grout DOT is a non-shrink, noncorrosive, non-metallic cementitious grout that is designed to provide a controlled, positive expansion to ensure excellent bearing area (EBA). 1107 Advantage Grout DOT can be mixed from a dry pack to a fluid consistency. Uses include: interior and exterior grouting of structural column base plates, pump and machinery bases, anchoring bolts, dowels, bearing pads and keyway joints. Industries served: paper mills, petrochemical refineries, food plants, aerospace, water/wastewater treatment plants, gas transmission, power generation, etc. Characteristics Include: - Controlled, Net Positive Expansion - Non Shrink - Non Metallic/Non Corrosive - Dry Pack to Pourable Consistancy, Pumpable - InteriorEexterior applications -
Five Star High Strength Grout is the industry?s leading cement-based, non-metallic, non-shrink grout for supporting machinery and applications requiring precision alignment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star High Strength Grout exhibits positive expansion and meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07, and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40?F - 90?F (4?C - 32?C). Characteristics Include: - Ultra-high 1, 7, and 28 day compressive strengths - 95% Effective Bearing Area (EBA) is typically achieved following proper grouting procedures - Placement versatility: can be poured, wet set or dry packed - Permanent support for machinery requiring precision alignment - Nonshrink from the time of placement Uses Inlcude:Grouting of machinery and equipment under high loads, grouting of structural steel and precast concrete panels, support of tanks and vessels, wind trubines, compressors and turbine equipment, grouting of anchors and dowels, etc.
-
Five Star HTR Grout is a unique cement based grout for supporting equipment and structural baseplates in high temperature environments. Five Star HTR Grout can be poured into place, gains strength rapidly and can be exposed to 1000?F (538?C) in three hours and up to 2400?F (1316?C) after a 7-day curing procedure. Five Star HTR Grout shows positive expansion when tested in accordance with ASTM C 827. Five Star HTR Grout meets the performance requirements of ASTM C 1107-02 and CRD-C 621-93 specs for nonshrink grout grades A, B, and C. Characteristics Include: - Thermal shock resistant - Resistant to sulfates - High temperature resistance - High early strengths - Does not fall below original placement volume per ASTM C 1107 Uses Include: areas of high temperature exposure, thermal cycling up to 2,400 Deg. F, rapid turn-around during shutdowns, coker kiln and foundary applications, etc. -
Five Star Epoxy Novolac Grout is a highly chemical resistant three component, 100% solids grout designed for industrial areas where exposures to acids and alkali's can occur. Five Star Epoxy Novolac Grout has excellent flowability, is moisture insensitive and is highly chemical resistant. Five Star Epoxy Novolac Grout meets ASTM-C 881 Type I, II, IV and V, Grade 2, Classes B and C. - High Chemical Resistance - Expansive, Non-Shrink - 95% Effective Bearing Area (EBA) - Superior Bond to concrete or steel - Meets ASTM C827 - Moisture insensitive - Low Exotherm - Excellent thermal shock, impact and wear resistance