All Weather J51 AW is a two component 100% solid, moisture tolerant, all weather epoxy acrylate hybrid anchoring gel that meets the ASTM C881 specification requirements. All Weather J51 AW is formulated to set up at room temperatures and down to temperatures of -15?F (-26?C).
All Weather J51 AW is ideal for anchoring dowels, bolts, threaded rod, pins and reinforcement steel in concrete. All Weather J51 AW can also be used in cooler and freezer applications or anywhere low temperature installations are required.
Characteristics: – Meets USDA requirements for use in incidental food contact.
– V.O.C. compliant, 100% Solids
– Complies with ASTM C881 and AASHTO M235
– Types I, II, IV, V, classes A, B & C. Grade 3 (with exception of gel time)
– Passed- ASTM E1512 (Sec.7.1 & 7.5)
– Elevated temperature creep test
– Mix Ratio (A to B by volume) – 10:1
– Gel time 60 GM MASS @ 73?F (23?C) – 7-8 Min
– ASTM D695 – Compressive Strength
– Greather than 10,000 PSI (68.95 MPa)
– ASTM D695 – Compressive Modulus: 270,000 PSI (1861.6 MPa)
– ASTM D570 – Water Absorption 0.06%
– ASTM D648 ? Heat Deflection temp 140?F (60 C)
– ASTM C882 ? Bond Strength
– 2-days: 2,800 PSI (19.31 MPa)
– 14-days 3,200 PSI (22.06 MPa)
– ASTM D638 ? Elongation at break 1.3%
