• Low Viscosity Polyurethane For Fast Repair of Cracks and Spalls in Concrete Characteristics: - Open to traffic in 60 minutes (4,600 psi) - Available in numerous cartridge sizes and in bulk - Self Leveling, Ultra low viscosity penetrates cracks and wets substrate and aggregate - Can be used with concrete powder pigments for color matching - Low odor, 1:1 mix ratio hybrid polyurethane - Temperature range of application 30?F to 110?F (-1?C to 43?C) - 4,000 psi compressive strength in 1 hour (neat) - Viscosity less than 100 cP - 12 month shelf life Uses Include: -Quick repair of interior/exterior hairline cracks in concrete -Spall repair when mixed with aggregate -Industrial floor repair for hightraffic areas -Parking structures and concrete bridge repair
  • Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks. Used to fill interior/exterior control joints or new construction saw joints on horizontal concrete surfaces. Characteristics: - Protects joint edges from spalling due to wheeled traffic - For exterior applications when minimal joint movement from thermal cycling will occur - Treated joints can be opened to traffic in 90 minutes at 75?F (24?C) - Wide application and service temperature range - Material Properties - VOC compliant formulations - Shore A hardness supports traffic - Self-leveling, low viscosity system - 18 month shelf life
  • Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks. Used to fill interior/exterior control joints or new construction saw joints on horizontal concrete surfaces. Characteristics: - Protects joint edges from spalling due to wheeled traffic - For exterior applications when minimal joint movement from thermal cycling will occur - Treated joints can be opened to traffic in 90 minutes at 75?F (24?C) - Wide application and service temperature range - Material Properties - VOC compliant formulations - Shore A hardness supports traffic - Self-leveling, low viscosity system - 18 month shelf life
  • Multi purpose, two component, moisture insensitive, epoxy repair paste, overhead and vertical repair, cartridge & bulk packaging, 1:1 ratio, application temperatures from 40 Deg. F to 110 Deg. F
  • Fast Cure Acrylic, Code compliant to IBC/IRC,ICC-ES-ESR4249, NSF certified, installation temperatures from 14 Deg. F to 104 Deg. F, Unicartridge for applicator ease
  • Fast Curing Cold Weather Doweling Adhesive Characteristics Include: - 100% styrene free (no carcinogens), low VOC content - Adhering dowel bars and tie bars for full depth concrete repairs - Fast full cure time in cold temperatures, 3 hours @ 23 ?F (-5 ?C) - Wide service temperature from -40 ?F to 176 ?F (-40 ?C to 80 ?C) - Available in 10 oz. Unicartridge and 28 oz. Plural Component cartridges - Can be installed down to 15 ?F (-9 ?C) - Moisture insensitive - ASTM C881-14 Type II, Grade 3, Class A & B with exceptions - Non-sag consistency - 18 month shelf life
  • High modulus, two component, Crack Injection Epoxy for concrete repair. Characteristics: - Inject into fine and medium crack (1/8" to 1/4") - Moisture tolerant - low viscosity (500cps) - self leveling - low surface tension allows for deep penetration into concrete cracks - plural component cartridge packaging or bulk units - ASTM C881 Type I, II, IV & V Grade 1, Class C; - AASHTO M235
  • A two-component, very low viscosity, Polyurethane hybrid formulation specially designed for quick repairs of hairline cracks and spalls in concrete substrate. CSR is a fast curing product to reduce downtime where return-to-service in needed. The CSR-LPL is a long potlife version of the CSR product. Use the CSR-LPL when aggregates are use to repair large spalls or deep holes in concrete floors. Characteristics: - Self leveling - Ultra low viscosity for deep penetration into craks resulting in a superior bond - High compressive strength (4,629 psi in one hour) - Easy 1:1 ratio mix - Available in 9 oz. Uni-cartridge or 22 oz. plural component cartridges or bulk packaging - Can be used with powder pigments for color matching - Application temperatures from 30 to 110 Def. F - Repaired cracks and spalls can be opened to traffic in less than 60 minutes - CSR-LPL long potlife facilitates adding aggregates for mortar repairs Uses Include: - Quick repair of interior and exterior hariline cracks -Quick repair of spalls when mixed with a specialty aggregate -industrial and commercial flood repairs for application with high volume traffic - Parking structure repairs - Concrete bridge repair
  • Adhesive Anchoring System, elevated temperature resistane, installed in dry, damp, water saturated or water filled holes with threaded rebar
  • High Modulus, two component, crack injection epoxy for concrete repair Characteristics: - Inject into to cracks from 1/4" to 3/8" wide - Moisture tolerant - Cures with virtually no shrinkage and bonds to most surfaces - Plural component cartridge packaging or bulk packaging - ASTM C881 Type I, II, IV & V Grade 1, Class C; - AASHTO M235
  • Multi-Purpose, rapid cure, epoxy bonding and repair product Characteristics: - Non Sag - High strength bonding agent for materials including concrete, brick, wood, stone and block - Non-sag patching material for cracks and small spalls, great for overhead and vertical repair - Can be used as an adhesive or filler - Cured surface can be sanded and painted - Rapid initial 3 hour cure at room temperature - Used as a capping paste for injection processes - Used as a port adhesive for crack injection process - Unicartridge packaging for easy installation with standard caulking gun(14:1 Recommended) - Moisture insensitive, can be used on damp surfaces and will cure underwater - Concrete gray color - 24 month shelf life - See MIRACLE BOND 1450 for bulk packaging
  • Super Low Viscosity (195cps), 2-component epoxy adhesive perfect for gravity-feed repair of hairline to fine width horizontal cracks. It can be used in temperatures between 50?F - 100?F for a variety of repair projects including vertical crack repair using injection ports in conjunction with a capping paste. Its bonding and sealing capabilities for interior and exterior slabs are exceptional. It can also be used as an epoxy mortar for spall repair when mixed with aggregate. Characteristics: - moisture insenitive for use in damp enviroments - Super low viscosity (195cps) and low surface tension allows it to deeply penetrate hairline to fine cracks. - plural component cartidge or bulk unit packaging - 100% solids, solvent free system - zero VOC content - excellent for small concrete spall repair or large spall with aggregate extension
  • High-Strength DOT Anchoring Epoxy Characteristics: - Long working time, 24 minutes @ 75?F (24?C) - Withstands freeze-thaw conditions - Multiple embedment depth design tables - Extensive coast to coast DOT approvals, including Caltrans - Low VOC, 2:1 mix ratio epoxy - Moisture insensitive allowing installation and curing in damp environments - ASTM C881-14 Type I, II, IV & V Grade 3, Class A, B & C - 28 month shelf life Uses Include: - Anchoring threaded rod, bolts and rebar dowels into concrete -short and long term tensile anchoiring, including wind, seismic, and shear forces in accordance with allowable stress design (ASD) - Grouting dowel bars and tie bars for full depth pavement repairs - Bonding agent for fresh to hardened concrete and hardened to hardened concrete
  • High Strength Anchoring Epoxy with multiple DOT approvals Characteristics: little or no odor, high modulus, Withstands freeze-thaw conditions, Anchoring threaded rod, bolts and rebar dowels into concrete - Unicartridge / Plural component cartridge or Bulk papckaging available, Standard working time, 20 minutes @ 75?F (24?C) Wide in-service temperature range 35 Deg F to 180 Deg F, Low VOC, 1:1 mix ratio epoxy - Moisture insensitive allowing installation and curing in damp environments - ASTM C881-14 Type I, II, IV & V Grade 3, Class A, B & C - 28 month shelf life
  • High strength, non-sag epoxy, available in cartridge or bulk packaging, 100% solvent free, zero VOC
  • two-component epoxy, exceptional strength, long working time, In-service temperature to 180 Deg. F, moisture insenitive for installation and cure in damp enviroments
  • Medium viscosity, high strength bonding adhesive, two component, 1:1 ratio, 100% solids, self leveling, cartridge or bulk packaging
  • Non-Sag viscosity, high strength bonding adhesive, two component, 1:1 ratio, 100% solids, self leveling, cartridge or bulk packaging
  • Hybrid formula, use in cracked and uncracked concrete, Overhead, horizontal, and vertical down applications, City of Los Angeles (COLA) approved, NSF certification, full cure in 45 minutes
  • A single component aerosol foam for the filling of anchor bolt isolation cans or PVC sleeves for adequate anchor bolt stretch during machinery installation. Also used to prevent future corrosion of the anchor bolt that has been embedded in the epoxy or cement grout.
  • We carry aggregates that are certified by the grout product manufactures for the extions of our epoxy and cement grout products as well as our structural concretes. Call one of our tech reps for a product recommendation.
  • We carry aggregates that are certified by the grout product manufactures for the extions of our epoxy and cement grout products as well as our structural concretes. Call one of our tech reps for a product recommendation.