• Pro-Flex is a 100% solids, two component, low shrink, moisture insensitive, joint filler and crack repair material. Pro-Flex is used to fill joints in industrial floors exposed to hard wheeled traffic. Pro-Flex is useful for contraction/construction joints that are cut or formed. Pro-Flex may also be used for the repair of damaged or spalled cracks. Characteristics: - Pourable consistency - Low V.O.C. (0 g/l) Compliant with all Federal EPA, OTC, SCAQMD, and CARB regulations - Viscosity (Self Leveling) - 1:1 mix ratio - Self-priming - Moisture insensitive - Allows moderate joint movement - Does not weld slab joints together - Does not embrittle with age - Meets U.S.D.A. requirements for incidential food contact
  • Pro-Poxy 400 is a two component 100% solids, moisture tolerant, all weather epoxy acrylate hybrid anchoring gel. Pro-Poxy 400 is formulated for rapid set up at room temperatures and down to temperatures of -15?F (-26?C). Pro-Poxy 400 is ideal for anchoring dowels, bolts, threaded rod, pins and reinforcement steel in concrete. Pro-Poxy 400 can also be used in cooler and freezer applications or anywhere low temperature installations are required. Ideal for setting injection ports and sealing cracks for the pressure injection process. Characteristics: - High modulus epoxy gel, high strength structural adhesive - Ideal for anchoring dowels, bolts, reinforcing steel, and threaded rod - Moisture tolerant - Fast setting, non sag gel - V.O.C. Compliant (0 g/l) Meets Federal EPA, OTC, LADCO, SCAQMD, & CARB regulations - Packaged in plural component uni-cartridges or dual cartridges - High chemical resistance - Meets ASTM C-881/AASHTO M-235, Types I, II, IV, V Grade 1, Classes A, B & C - Excellent adhesion to most construction materials - All weather and temperature installation - Ideal for cold weather installations - Styrene free
  • Pro-Poxy 100 is a 100% solids, high modulus, moisture tolerant, low viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete or voids in machinery bases. Characteristics: - High modulus, high strength adhesive - Low viscosity, for deep penetration into cracks or narrow voids (518 cps) - Moisture tolerant - V.O.C. Compliant (0 g/l) Meets Federal EPA, OTC, LADCO, SCAQMD, & CARB regulations - Packaged in plural component cartridges or gallon units - High chemical resistance - Certified to conform to NSF/ANSI Standard 61 by WQA - Meets ASTM C-881/AASHTO M-235, Types I, II, IV, V Grade 1, Classes B & C
  • Pro-Poxy? 204 is a 100% solids, fast setting, two component, high modulus, medium viscosity, moisture tolerant structural epoxy adhesive. The primary use of the Pro-Poxy? 204 is for bonding fresh concrete to hardened concrete. Pro-Poxy? 204 has excellent adhesion to most construction materials. Pro-Poxy? 204 may be used for anchoring bolts, dowels and reinforcing steel in concrete and for filling large voids in machinery baseplates. Characteristics: - High modulus, high strength adhesive - Medium viscosity, for deep penetration into cracks or narrow voids (5,800 cps) - Moisture tolerant - V.O.C. Compliant (0 g/l) Meets Federal EPA, OTC, LADCO, SCAQMD, & CARB regulations - Packaged in plural component cartridges or gallon units - High chemical resistance - Certified to conform to NSF/ANSI Standard 61 by WQA - Meets ASTM C-881/AASHTO M-235, Types I, II, IV, V Grade 1, Classes B & C - Ideal for bonding fresh concrete to hardened concrete - Secondary use for anchoring dowels, bolts and reinforcing steel - Excellent adhesion to most construction materials
  • Pro-Poxy 300 Fast is two component, moisture tolerant, 100% solids, high modulus epoxy gel adhesive. Pro-Poxy 300 Fast is ideal for anchoring bolts, dowels, and reinforcing steel in concrete. It is also ideal for vertical and horizontal structural bonding and patching. Pro-Poxy 300 Fast may also be used to seal cracks and set injection ports prior to pressure injection grouting. Characteristics: - High modulus epoxy gel, high strength structural adhesive - Ideal for anchoring dowels, bolts, reinforcing steel, and threaded rod - Moisture tolerant - Fast setting gel - V.O.C. Compliant (0 g/l) Meets Federal EPA, OTC, LADCO, SCAQMD, & CARB regulations - Packaged in plural component cartridges or gallon units - High chemical resistance - Meets ASTM C-881/AASHTO M-235, Types I, II, IV, V Grade 1, Classes B & C - Excellent adhesion to most construction materials - Non-sag gel consistency
  • Pro-Poxy 300 is a two component, 100% solids, moisture tolerant, high modulus epoxy gel adhesive. Pro-Poxy 300 is ideal for anchoring bolts, dowels and reinforcing steel in concrete. It is also ideal for vertical and horizontal structural bonding and patching. Pro-Poxy 300 may be used to seal cracks and set injection ports prior to pressure injection grouting. Characteristics: - High modulus epoxy gel, high strength structural adhesive - Ideal for anchoring dowels, bolts, reinforcing steel, and threaded rod - Moisture tolerant - V.O.C. Compliant (0 g/l) Meets Federal EPA, OTC, LADCO, SCAQMD, & CARB regulations - Packaged in plural component cartridges or gallon units - High chemical resistance - Meets ASTM C-881/AASHTO M-235, Types I, II, IV, V Grade 1, Classes B & C - Excellent adhesion to most construction materials - Non-sag gel consistency - High-strength structural adhesive - Ideal for anchoring dowels, bolts, reinforcing steel and threaded rod - Moisture tolerant - Excellent adhesion
  • Pro-Poxy 50 is a 100% solids, high modulus, moisture tolerant, very low viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. The Pro-Poxy 50 primary use is for pressure injection and gravity feed crack repair in concrete and masonry and for filling very small voids in machinery pump bases. Excellent for rebonding loose base plates for vibration dampening. Characteristics: - High modulus, high strength adhesive - Low viscosity, for deep penetration into cracks or narrow voids (135 cps) - Moisture tolerant - V.O.C. Compliant (0 g/l) Meets Federal EPA, OTC, LADCO, SCAQMD, & CARB regulations - Packaged in plural component cartridges or gallon units - High chemical resistance - Certified to conform to NSF/ANSI Standard 61 by WQA - Meets ASTM C-881/AASHTO M-235, Types I, II, IV, V Grade 1, Classes B & C

Title