Adhesives & Bonding Agents

  • Low Viscosity Polyurethane For Fast Repair of Cracks and Spalls in Concrete Characteristics: - Open to traffic in 60 minutes (4,600 psi) - Available in numerous cartridge sizes and in bulk - Self Leveling, Ultra low viscosity penetrates cracks and wets substrate and aggregate - Can be used with concrete powder pigments for color matching - Low odor, 1:1 mix ratio hybrid polyurethane - Temperature range of application 30?F to 110?F (-1?C to 43?C) - 4,000 psi compressive strength in 1 hour (neat) - Viscosity less than 100 cP - 12 month shelf life Uses Include: -Quick repair of interior/exterior hairline cracks in concrete -Spall repair when mixed with aggregate -Industrial floor repair for hightraffic areas -Parking structures and concrete bridge repair
  • Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks. Used to fill interior/exterior control joints or new construction saw joints on horizontal concrete surfaces. Characteristics: - Protects joint edges from spalling due to wheeled traffic - For exterior applications when minimal joint movement from thermal cycling will occur - Treated joints can be opened to traffic in 90 minutes at 75?F (24?C) - Wide application and service temperature range - Material Properties - VOC compliant formulations - Shore A hardness supports traffic - Self-leveling, low viscosity system - 18 month shelf life
  • Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks. Used to fill interior/exterior control joints or new construction saw joints on horizontal concrete surfaces. Characteristics: - Protects joint edges from spalling due to wheeled traffic - For exterior applications when minimal joint movement from thermal cycling will occur - Treated joints can be opened to traffic in 90 minutes at 75?F (24?C) - Wide application and service temperature range - Material Properties - VOC compliant formulations - Shore A hardness supports traffic - Self-leveling, low viscosity system - 18 month shelf life
  • Multi purpose, two component, moisture insensitive, epoxy repair paste, overhead and vertical repair, cartridge & bulk packaging, 1:1 ratio, application temperatures from 40 Deg. F to 110 Deg. F
  • High modulus, two component, Crack Injection Epoxy for concrete repair. Characteristics: - Inject into fine and medium crack (1/8" to 1/4") - Moisture tolerant - low viscosity (500cps) - self leveling - low surface tension allows for deep penetration into concrete cracks - plural component cartridge packaging or bulk units - ASTM C881 Type I, II, IV & V Grade 1, Class C; - AASHTO M235
  • High Modulus, two component, crack injection epoxy for concrete repair Characteristics: - Inject into to cracks from 1/4" to 3/8" wide - Moisture tolerant - Cures with virtually no shrinkage and bonds to most surfaces - Plural component cartridge packaging or bulk packaging - ASTM C881 Type I, II, IV & V Grade 1, Class C; - AASHTO M235
  • Multi-Purpose, rapid cure, epoxy bonding and repair product Characteristics: - Non Sag - High strength bonding agent for materials including concrete, brick, wood, stone and block - Non-sag patching material for cracks and small spalls, great for overhead and vertical repair - Can be used as an adhesive or filler - Cured surface can be sanded and painted - Rapid initial 3 hour cure at room temperature - Used as a capping paste for injection processes - Used as a port adhesive for crack injection process - Unicartridge packaging for easy installation with standard caulking gun(14:1 Recommended) - Moisture insensitive, can be used on damp surfaces and will cure underwater - Concrete gray color - 24 month shelf life - See MIRACLE BOND 1450 for bulk packaging
  • Super Low Viscosity (195cps), 2-component epoxy adhesive perfect for gravity-feed repair of hairline to fine width horizontal cracks. It can be used in temperatures between 50?F - 100?F for a variety of repair projects including vertical crack repair using injection ports in conjunction with a capping paste. Its bonding and sealing capabilities for interior and exterior slabs are exceptional. It can also be used as an epoxy mortar for spall repair when mixed with aggregate. Characteristics: - moisture insenitive for use in damp enviroments - Super low viscosity (195cps) and low surface tension allows it to deeply penetrate hairline to fine cracks. - plural component cartidge or bulk unit packaging - 100% solids, solvent free system - zero VOC content - excellent for small concrete spall repair or large spall with aggregate extension
  • Medium viscosity, high strength bonding adhesive, two component, 1:1 ratio, 100% solids, self leveling, cartridge or bulk packaging
  • Non-Sag viscosity, high strength bonding adhesive, two component, 1:1 ratio, 100% solids, self leveling, cartridge or bulk packaging
  • Sure Bond J58 is a 100% solids, two component, high modulus, medium viscosity, moisture tolerant structural epoxy adhesive that meets the requirements of ASTM C- 881 and AASHTO M-235. The primary use of the Sure Bond J58 is for bonding fresh concrete to hardened concrete. Sure Bond J58 has excellent adhesion to most construction materials. SureBond J58 may be used for anchoring bolts, dowels and reinforcing steel in concrete. Characteristics: - - High strength structural adhesive properties meeting ASTM C-881, AASHTO M-235, Types I, II, IV, V, Grade 2, Classes B & C (*with exception of gel time) - ideal for bonding fresh concrete to existing hardened concrete - secondary use for anchoring dowels, bolts, and reinforcing steel - Mix ratio: 1:1, part A to part B by volume - Color (mixed): Gray - Medium Viscosity Pumpable (ASTM 2393): 6200 cps - moisture tolerant - Gel time: 28 min. @ 73?F (23?C) - Shrinkage (ASTM D-2566): 0.0015
  • Sure Bond J58 LPL is a 100% solids, two component, high modulus, medium viscosity, moisture tolerant, long open time structural epoxy adhesive. Sure Bond J58 LPL primary use is for bonding fresh concrete to hardened concrete or steel. Sure Bond J58 LPL has excellent adhesion to most construction materials. Characteristics: - High strength structural adhesive properties meeting ASTM C-881, AASHTO M-235, Types I, II, IV, V, Grade 2, Classes B & C (*with exception of gel time) - ideal for bonding fresh concrete to existing hardened concrete - long working time for new concrete placement - Mix ratio: 2:1, part A to part B by volume - Color (mixed): Gray - Medium Viscosity Pumpable (ASTM 2393): 6200 cps - Moisture Tolerant - Gel time: 3.5 hours @ 73?F (23?C) - Shrinkage (ASTM C883): Passes - Thermal Compatibility (ASTM C-884): Passes